Second-hand machinery for sale (200,000)

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Gbedpfxjz Rqz Nj Akysu Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: used, Year of construction: 2020, total length: 3,920 mm, - Arbeitshöhe max. 14,30m Godpjz Rq Agefx Akysbu - Plattformhöhe max. 12,30m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79m - Plattformlänge – außen, ausgeschoben 4,32m - Plattformausschub – Länge 1,52m - Plattformbreite – außen 1,60m - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 7,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit – eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m - Hub-/Senkzeit 61/43 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen Längsachse/Querachse) 5,3° / 11,7° - Reifenkontaktdruck 641 kPa - Bodenlast 10,56 kPa - Schall- & Vibrationspegel - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s²

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² Gsdpfx Akez Rq Atjyobu · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Gbedpez Rq Hljfx Akyeu Manufacturer: Hidrostal Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.

Condition: new, functionality: fully functional, Year of construction: 2025, total height: 1,200 mm, total length: 1,000 mm, total width: 1,220 mm, load capacity: 5,000 kg, forkCarriage Producing company R&R Type 1005025 Year built 2025 Height (mm) 1,200 Gedpfxoz Rq Ayj Akyebu Length (mm) 1,000 Lifting weight (kg) 5,000 Width (mm) 1,220

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Gsdpfx Aez Rpg Dekysbu Doosan S280N, year 2006 Fanuc Oi Mate TB control Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Max. turning diameter: 280mm 10-tool turret Tailstock Parts catcher Chip conveyor with tank and pump Machine documentation

Condition: used, Year of construction: 2013, number of controlled axis 6 STK workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ Gbodpfjzupmgjx Akyju The KR 60-3 industrial robot is a front-runner in its class thanks to its high flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,300 mm, free lift: 2,650 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Gsdpfx Akoxxdy Aoyebu Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used forklifts outright, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 13.6 60-32 model. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner, Fork positioner opening range: 630 / 2,280 mm Heater, full cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,256 h, load capacity: 3,500 kg, lifting height: 3,665 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: Lithium-ion Battery year of manufacture: 2019 Gjdpfx Akoy Tqzfjyjbu Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Act), full cabin, full free lift, non-marking tires, lithium-ion technology.

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 140mm - number of spindles 4 1) horizontal lower 200mm, 5.5kW 2) vertical right 140mm, 4kW 3) vertical left 140mm, 4kW 4) horizontal upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm – top: - 6 infeed rollers, toothed, including 2 double rollers - outfeed roller, toothed, double, rubber – bottom: - side pressure roller - infeed roller, toothed, helical, in the lower table - side pressure roller Godpfx Akjzx Sn Uoysbu - outfeed roller, smooth, metal - all rollers pneumatically pressed - length of the infeed table 1600mm - table adjustable up/down - central lubrication - electric setting of the planing thickness - lifting motor 1.1kW - stepless feed rate adjustment - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x140mm - dimensions L/W/H 3200x1700x1750mm - weight 3000kg ADVANTAGES – for 4 heads – ideal for both wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 7832 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max. workpiece thickness 300mm - digital thickness display – from above: - outfeed rollers - sequential infeed roller - planing roller - 2 smooth, pull-type, metal outfeed rollers – from below: - adjustable rollers in the lower bed 2 pcs - bed with 4 screws Gbedpfx Ajzxg T Sokyju - motor 7.5kW - brake - electric bed lifting - 2 feed speeds 7/14m/min - feed motor 0.75/1.1kW - dust extraction port diameter 160mm - dimensions (L/W/H) 1540x1220x1230mm - weight 1300kg ADVANTAGES - Polish production - electric bed lifting - segmented feed roller - used thickness planer, very good condition Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls Gedpfx Akjztalqsysbu - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller Gbedjzxhdfepfx Akysu - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece Gsdpfxozyy Dto Akyjbu - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control unit for height, tilt, and stop - Program memory for 99 programs - With sliding table insert - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: used, empty load weight: 7,420 kg, maximum load weight: 37,580 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 05/2002, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 56 x lashing points, loading area length (high bed): approx. 3,850 mm, loading area length (low bed): approx. 9,600 mm, loading height: 880 mm, 4 x center rails, 8 x rail pockets in the outer frame, surcharge for aluminum ramps: €900, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Gedjz Rn Slepfx Akyjbu

Condition: used, mileage: 140,262 km, power: 96 kW (130.52 HP), first registration: 09/2021, fuel type: diesel, empty load weight: 2,043 kg, maximum load weight: 882 kg, overall weight: 3,000 kg, axle configuration: 2 axles, wheelbase: 2,933 mm, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, sliding door, truck registration, | Ford Transit Custom L2H1 | Engine capacity: 1995cc, 130 hp | Air conditioning, radio/CD | Reversing camera | Front and rear parking sensors | Remote central locking, fog lights | Air conditioning, electric windows | Tow bar | Valid roadworthiness certificate (Pickerl) | Austrian vehicle | Load area dimensions: L:2.85m, W:1.70m, H:1.46m | Subject to errors, input mistakes and prior sale. Gbjdpfx Akoywk S Soyou

Condition: used, mileage: 62,952 km, power: 96 kW (130.52 HP), first registration: 10/2021, fuel type: diesel, empty load weight: 2,031 kg, maximum load weight: 894 kg, overall weight: 3,000 kg, axle configuration: 2 axles, wheelbase: 2,933 mm, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, sliding door, truck registration, | Ford Transit Custom L2H1 | Engine capacity: 1995cc, 130 hp | Air conditioning, radio/CD | Reversing camera | Front and rear parking sensors | Remote central locking, fog lights | Air conditioning, electric windows | Tow bar | Valid roadworthiness certificate (Pickerl) | Austrian vehicle | Load area dimensions: L:2.85m, W:1.70m, H:1.46m | Subject to errors, input mistakes and prior sale. Gedpfx Aksyu Tmroyebu

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Gsdpfovf D Anox Akysbu

Condition: good (used), Machine come with equipement from pictures. Godpjvx Tikofx Akysbu Parts shown by hand not come.

Condition: used, Year of construction: 2006, Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader, Quinto software, version 4.3b, Software for cylindrical cutters, Software for conical cutters, Software for hemispherical conical cutters, Software for two-flute cutters, Software for three-flute cutters, Software for hob cutters, Software for up-and-down cutters, Software for wood drills, Software for tools with an axial angle, Software for taps, Software for step drills, Software for drills, types H and S, ISO axial software, ISO spiral software, Elbaron electrostatic mist extractor, Hydraulic workpiece clamping, Renishaw measuring probe, Automatic fire-extinguishing system, Automatic centralized lubrication system, Glass scales on the linear axes, Godpfxjz Rpnho Akyobu 1 loading pallet, 16 grinding wheel flanges, 4 collets, 1 collet chuck, 1 automatic 5-jaw chuck, PMH. X-axis longitudinal movement: 380mm Y-axis transverse movement: 280 mm Z-axis vertical movement: 280 mm C-axis swivel range: 340° A-axis rotation range: 360 ° Center height: 210 mm Workpiece holder: ISO 50 Grinding wheel diameter: Max. 200 mm Drive power grinding lockers: 7,5 kW Grinding spindle speed: stepless 0 - 9000 rpm Connected load: 29 kW (400 V / 50 Hz) Dimensions W x D x H: 1590 x 1930 x 2550 mm mass: approx. 4800 kg colour: turquoise / grey

Condition: used, Year of construction: 2007, Filtration with briquette press 3435H Press group 4 kW Gedsz Rpqvspfx Akyebu Briquettes 120/45 mm Automatic dewatering Automatic start mode with workshop machines Temperature probe with water-extinguishing in case of emergency 400V

Condition: excellent (used), Catalog number: 7959 TECHNICAL DATA - track width: 250mm - shaft width: 250mm - max. blade diameter for multi-blade saw: 350mm - blade arbor diameter: 70mm - max. cutting height for multi-blade saw: 120mm - table width with clearance: 830mm - table length: 1780mm – from above: - fences - roller, sliding pressure roller, metal, smooth - fences - pressure roller, sliding - saw shaft - pressure roller, sliding, metal, 2 pcs – from below: - guide strip - fences - track - electric adjustment of the machine body, up/down - manual adjustment of the saw shaft - central lubrication - stepless feed rate adjustment - feed motor: 1.1kW - main motor: 37kW - diameter of the dust extraction nozzle: 170mm - overall dimensions (L/W/H): 2000x1500x2000mm - weight: 1850kg ADVANTAGES - German production - Used multi-blade saw, very good condition Net price: 45900 PLN Net price: 10675 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to larger fluctuations) Gbodpfx Ajzxq Efokysu

Condition: excellent (used), power: 264 kW (358.94 HP), operation weight: 23,600 kg, tire size: 30/65R25, tire condition: 60 %, Year of construction: 2023, operating hours: 2,179 h, Equipment: air conditioning, VOLVO A30G Year: 2023 Godpfxjz Rpq Ns Akyebu Operation hours: 2.179 hrs. ROPS Airco Back drive camera Radio Central lubrication body heating Tailgate Bridgestone tyres 30/65R25: front approx 60% good, rear approx. 50 % good VOLVO D11M Motor with 264kW CE Operation weight: 23,6 to. with new service

Condition: excellent (used), Catalog number: 7775 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 300mm - From top to bottom: - Feed pawls - Toothed, pulling, and twisting infeed roller - Pressure roller - Planing roller - Pressure roller - 2 smooth, pulling, rubber outfeed rollers - Digital display of planing thickness - Motor: 5.5kW - Electric table lifting: 0.7kW - Stepless feed rate adjustment: 6-20m/min - Feed motor: 1.1kW - Diameter of dust extraction port: 150mm - Dimensions (L/W/H): 1000x1400x1200mm - Weight: 950kg ADVANTAGES - Made in Italy - Electric display of planing thickness - Electric table lifting - Used planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Gbsdpfxjzx Sx Te Akysu Net price: 6628 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Godpfx Aksyya Insysbu Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Working hours: 51814 h Type: Horizontal Drive: Hydraulic