Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Lodpfx Abez D Taaozohl Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 Lhsdpfjz A Tbuex Abzjl MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Lodpfx Aoz Efpcjbzohl Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 fiber laser cutting machine – manufactured in 2019 – used Bodor P3 3D? / fiber laser cutting system – manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning and a generous working area. An interesting machine for sheet metal processing, metalworking, job production and industrial manufacturing. Used machine – inspection possible by appointment. Transport, dismantling and loading can be organized upon request. Dismantling, transport and loading can be organized throughout Europe for an additional charge, if desired. Prices plus VAT. Lhedez Egzgopfx Abzjl Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Lsdpfjz Apdzjx Abzshl Machine weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Parts shown by hand not come. Lhsdpfsz Egxfsx Abzjl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Lhodpfxjz Ay Rrj Abzjl Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Lhodpfxozy Npfo Abzjl Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Ljdpfx Ajzy Hhxsbzjhl Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand Lsdpfxoyvgias Abzjhl - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Lhjdpfx Abozzx H Aozel Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Lsdpfx Abjzzx Hcezjhl Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: used, Year of construction: 2004, Technical details: Lhsdpfxsz Egckj Abzsl x-travel: 2700 mm y-travel: 1000 mm z-travel: 1050 mm T-slots: 7x22 feed speeds: 10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min *

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, measuring range X-axis: 3,000 mm, total width: 500 mm, total length: 1,000 mm, total height: 1,000 mm, overall weight: 30 kg, positioning accuracy: 0.045 mm, ● Availability: By arrangement Lhsdpfxjz A Tcfs Abzol ● Internal No.: ZM3 Technical data: Measuring volume: 3,000 mm Accuracy: 0.045 mm Scope of delivery: ● Includes laptop and software as shown in the images (completeness not guaranteed) ● Includes transport case Dimensions & weights: ● Installation dimensions (L x W x H): approx. 1,000 x 500 x 1,000 mm ● Weight: approx. 30 kg Additional notes: ►Upon request, we can offer transport to the desired location. ►The goods are sold with no warranty of any kind. ►Technical data subject to change. ►The red base frame is not included in the scope of delivery.

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Lhedpfx Abjz D H Hyjzol Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: used, Year of construction: 2007, operating hours: 7,720 h, Type of fuel: LPG Colour: Grey Empty weight: 4.250 kg Dimensions (LxBxH): 283 x 124 x 311 cm Lifting capacity: 3.000 kg Lift height: 650 cm Clearance lift height: 228 cm Fork dimensions: 1.190 x 1.100 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 702563 - Operating hours: 7720 - Lifting capacity: 3000kg - Lifting height: 6500mm - Overhead clearance: 3100mm - Free lift: 2280mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Work lights, Free-lift - Mast: Triplex - Drive: LPG Lodpsyupmbjfx Abzehl - Motor brand: Nissan - Transport dimensions: 2830mm x 1240mm x 3110mm (l x w x h) - Transport weight [kg]: 4250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Lhsdpezi Ihfjfx Abzel Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Year of construction: 2005, condition: used, Film Slitter Manufacturer: Wulf Maschinenbau Type: WSH 700 Year of manufacture: 2005 Technical data Roll width: 50 - 700 mm Unwind roll diameter: max. 800 mm Rewind roll diameter: max. 800 mm Unwind mandrel diameter: 6 Rewind mandrel diameter: 6 Cutting system: Block cutter Strip width: 15 - 700 mm Cutting speed: 10 - 100 m/min Material thickness: max. approx. 2 mm (depending on the material) Material selection: PVC, PE, PP, paper Web tension: max. 5 N/cm Dimensions Unwind station Length: approx. 1300 mm Ledpfx Asz Ef Ixjbzehl Width: approx. 1600 mm Height: approx. 1200 mm Weight: approx. 500 kg Cutting unit Length: approx. 1100 mm Width: approx. 2200 mm Height: approx. 1500 mm Weight: approx. 1300 kg Rewind station Length: approx. 1600 mm Width: approx. 1700 mm Height: approx. 1200 mm Weight: approx. 700 kg Connection values Connected power: 25 kW Frequency: 50-60 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65086, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC530, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,900 mm Travel range, Y-axis: 1,000 mm Lhedpez Apdnefx Abzsl Travel range, Z-axis: 700 mm Spindle speed: 6,000 rpm Tool interface: SK40 Number of tool magazine positions: 24 MACHINE DETAILS Control system model: Heidenhain TNC530

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Lsdpfx Abjzzqabozehl Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: excellent (used), HELMUT FISCHER X-ray fluorescence measuring device / film thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Lhedpfx Absz Egi Rezel Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Ljdpfx Aboz D H Drszjhl Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Lhsdpjzzx Hijfx Abzsl Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Lsdpfszy Ndcjx Abzohl Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W Lhodpfsz Ahrwsx Abzel MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain