Second-hand machinery for sale (200,000)

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Cgedpsw Uf Hwsfx Akcot Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Cedpfx Ajxpqy Dekcjgt Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) Cgodpfx Akow Iq Ugjcjt - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Cgjdey Nnnnspfx Akcst Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Cedpfxsdzp Tbs Akcjgt Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: used, Year of construction: 1965, total length: 7,750 mm, total width: 1,400 mm, total height: 1,600 mm, Colour: Grey Empty weight: 5.000 kg - Year: 1965 - Documentation available: No - CE certificate present: No - Serial number: 16628 - Drive system: Conventional - Power [kW]: 13.7 - Centre height [mm]: 300 - Swing over bed [mm]: 600 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 6000 - Bed width [mm]: 400 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 22.4 - Max. spindle speed [rpm]: 1000 - Options: Fixed steady, Quick-change tool post, Removable bed, Travelling steady, Three-jaw chuck Csdpfx Akeyy Ntmscogt - Swing over removable bed [mm]: 900 - Transport dimensions: 7750mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic Cjdpfx Aksy Nnkvscogt -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: good (used), Lathe – cycle-controlled Cjdpfx Aksy Nnirocsgt Manufacturer: SEIGER Machine model: SLZ 570 E Control: Sinumerik Year of manufacture: 2004 TECHNICAL DATA Max. turning length (mm): 1,000 Max. swing diameter over bed (mm): 570 Max. swing diameter over cross slide (mm): 340 Tool holder cross-section (HxW) (mm): 25x25 Changes and errors in the technical data and specifications are reserved.

Condition: good (used), Professional three-phase electric motor from the renowned German manufacturer KAISER – Elektromotoren-Werke Kaiser. Robust industrial design intended for continuous duty in industrial machines, pumps, fans, machine tools, compressors, and technological drive systems. The motor features flange mounting and a shaft with a diameter of approximately 28 mm, with a keyway. Technical data: • Manufacturer: Elektromotoren-Werke Kaiser • Type: DN 112 S/2 • Power: 4.0 kW • Voltage: 380V • Current: 9.0 A Csdsy Nm Tvepfx Akcegt • Frequency: 50 Hz • Speed: 2880 RPM • Three-phase motor • Shaft diameter: approx. 28 mm • Flange mounting • Durable industrial housing • Made in Germany Applications: • Pumps • Fans • Industrial machinery • Machine tools • Compressors • Technological drives • Production equipment Condition: Used item. Shows normal signs of use and storage. Visual condition as shown in the photos.

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: Cjdpfsy Nm Rnex Akcegt • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: good (used), For sale is a used Felder AD7-41 planer-thicknesser with a maximum planing height of up to 220 mm. The machine is in good condition and has been serviced and inspected by our qualified personnel. Technical specifications: Cjdpfey Nnf Hox Akcjgt - Felder system cutter block - Planing width: 410 mm - Max. clearance: 220 mm - Motor power: 4 kW / 5.4 HP - Incl. boring support - Incl. transport trolley for support - Year of manufacture: 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surfacer, thicknesser, planer, jointer, thickness Reference: R-R027F

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Cjdpfx Aouqdhwjkcjgt Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, Year of construction: 2005, Additional title: two component mixing plant with deareation and carbonisation Capacity: 9600 l/h Cgedjy Nncxepfx Akcot Maximum CO2 content (operating value): 8 to 8,5 g/l Residual oxygen content (operating value): 1 to 1,5 mg/l Accuracy of Brix and CO2 measurement respectively: ± 0.05 °Brix; ± 0.05 vol% alcohol Features: Brix measurement and CO2 measurement (ACM company);

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers Cjdpfxew Dcdgj Akcegt -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 7310/1100/H460 mm -Load capacity: 12 t -Tires: Continental Elastic 525/120-3 solid rubber twin tires -Dimensions total: 8380/1290/H1425 mm -Weight: 1150 kg

Condition: used, System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg. Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on container size and product viscosity Cgsdpfjy Nnb Usx Akcst Capacity labeler appr.: 1080 units/h Formats: round plastic buckets ranging from 1 litre to 10 litres

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Twister ECO+ wood lathe with a center distance of approx. 720 mm. The machine is in excellent condition and has been refurbished and inspected by our professional technicians. (Fully functional) Technical data: - Center height: 200 mm - Swing over bed: 395 mm (with optional outboard turning device, capacity increases accordingly) Codpfxsy Nm Tpo Akcjgt - Center distance: 720 mm (extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 60 – 1,350 and 180 – 3,750 rpm - Motor with forward and reverse operation - Tailstock quill travel: 100 mm - Motor: 1.5 kW / 2 HP (230 V connection) with frequency inverter - Stand version weight (incl. cast iron legs): 165 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: woodturning machine, lathe, wood lathe, turning lathe, woodturning, woodturning tools, wood turning, lathe machine Reference: R-D1618

Condition: used, Year of construction: 2015, Technical details: turning diameter: 200 mm Codpeq Sc Husfx Akcegt swing diameter: 260 mm turning height: 60 mm

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: Cjdey Nm A Ropfx Akcsgt • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 18 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: 35 mm -Protection class: IP 54 Quantity: 1 piece available Cgodpfxjchbvye Akcjt -Dimensions: 490/261/H300 mm -Weight: 38 kg

Condition: used, Year of construction: 2016, Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology. Additional title: Empty bottle control Capacity filline line: 12000 bo/h Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Running direction: left -> right Cgsdpsy Nnbbjfx Akcet Operation / Control: Simatic S7 Position: in a footed housing Base construction: straight-running Features: Control and display panel, housing with safety doors, bottle discharge

Condition: used, Year of construction: 2017, functionality: fully functional, RBB – Year 2017 Semiautomatic Storage Rack Jumbo 17 positions - 1 fixed trolley, 400 mm platform - 16 mobile trolleys, 250 mm platform Cgodjyx Dz Ajpfx Akcjt Cylinder stroke: 900 mm 380 V 50 Hz

Condition: used, Year of construction: 2018, functionality: fully functional, PUJOL LAM PRO – Year 2018 Cgedpfx Akjyvgvkocot Lamination Furnace Internal dimensions 2800 x 4000 mm Power 40 kW

Condition: used, Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1) Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999 Capacity appr.: 120 Kegs/h Operation / Control: Simatic S7-300 Csdoy Nm Uajpfx Akcegt Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618 Cjdpfey Nm Rhox Akcjgt

Condition: used, operating hours: 170 h, Rammax Rw 702 | Used Tandem Roller | 170 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 8 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: not ready to start, according to the owner only the crank is missing, has compression 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40728 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Cgsdpfsy Nm R Iex Akcet