Firefighting vehicle HLF 20/20 MAN ME 15280

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. Fsdpfx Adezf Ircj Isgd External reference: 8571

Condition: used, mileage: 112,997 km, power: 96 kW (130.52 HP), first registration: 06/1979, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, suspension: other, number of seats: 5, total length: 6,700 mm, Equipment: all wheel drive, bathroom, cruise control, parking heater, Fixed bed, bunk bed, separate shower, mid-ship seating area, classic vehicle, radio, power steering, new general inspection/emissions test, U1300 with H-registration classic vehicle manual transmission, diesel, all-wheel drive, diesel: 4 x 125 L + 70 L for auxiliary heater, all diesel tanks individually switchable. Auxiliary heater with remote control, new in 2020, power steering, cruise control, naturally aspirated 6-cylinder, U1300 naturally aspirated, radio, walk-through cab, 2 air-suspended seats, 5-seater, 4 sleeping berths, fixed bed, bunk bed, mid-ship seating area, separate shower, toilet, 560 L water tank, 80 L waste water (grey water) tank, new boiler, new gas lines, new kitchenette, new water pump (2019), cab with cage and roof rack, work crane with hand winch, walkable roof with railing, 8.0 t front rope winch by Werner with remote control, 60 m rope, tires as new, fast axle registered for 104 km/h, immediately available! Reason for sale: replacement purchase, immediately ready for use. Conversion by a renowned South German coachbuilder, converted to a motorhome in 1996, fully overhauled in 2017, classic vehicle certification and new service 12/2020, recent inspection, body from 1996. FOR US, CONDITION AND FEEL ARE MOST IMPORTANT, PRICE IS SECONDARY. *TRADE-IN, PART-EXCHANGE OR COLLATERALIZING YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee.* More offers on our homepage. The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the dealership upon purchase of the vehicle is binding. Errors and prior sale excepted! Fsdsvict Tepfx Ad Iogd

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Fjdozf Id Sepfx Ad Iegd Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. Fodpfx Aezf Ibwod Iogd External Reference: 8649

Condition: ready for operation (used), Type ACC 2.4 Fgsdpfxod H Ncps Ad Ied

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Fgjdpfjzf Ibdox Ad Ied Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Max. cutting height: 430 mm Fgodpfx Adszf H Sze Isd EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. External Reference: 8580

Condition: used, mileage: 21,699 km, power: 121 kW (164.51 HP), first registration: 06/1994, fuel type: diesel, empty load weight: 6,230 kg, maximum load weight: 2,770 kg, overall weight: 9,000 kg, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 9, total length: 6,330 mm, Year of construction: 1994, construction height: 3,000 mm, Equipment: all wheel drive, The Mercedes-Benz 917 AF LF8/6 fire engine is a robust, used emergency vehicle that was first registered in 1994. It features a powerful 6-litre diesel engine delivering 121 kW (165 hp) and a 4x4 drive, making it ideal for deployment in challenging terrain. The vehicle has a mileage of only 21,699 km, which is exceptionally low for a model of this age. The fire truck is finished in a striking red and offers seating for up to 9 occupants. With a permitted gross weight of 9,000 kg and dimensions of 6,330 mm in length, 2,500 mm in width, and 3,000 mm in height, it is a substantial and functional vehicle, well equipped for firefighting or rescue operations. The sale price is €10,900, and the vehicle can be viewed by appointment in Rohrbach. The seller also offers various services such as registration support and nationwide delivery for an additional charge. For detailed information, please contact us by phone or email. Fjdpjxv Et Ejfx Ad Isgd Sale is only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Fgedpfx Aozf H R Red Iod Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 Fjdpfx Ajzf H Nyod Isgd The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: new, overall weight: 400 kg, Uras 3-Head Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi 3 Print Heads: 1800mm Thanks to the high-speed print heads featuring new technology, you achieve powerful results at low production costs with a print speed of 110 m²/hour in 2-pass mode. Highlights: - 3 x 4720/3200i Print Heads with 2400 dpi high resolution - 2-stage ink system (220 ml ink cartridge and 1.5 l ink tank) - Integrated housing heater, infrared heater, and fan system - Unwinding spindle to prevent paper bubbling - Printing up to 600 meters with tension rewinding system - 2-pass mode (360x1200 dpi) 110 m²/hour Product Specifications: - Print Heads: Piezo print head, 3 units (3200i/4720) - Media: - Width: 1820mm - Thickness: 1 mm or less - Weight: up to 60kg - Max. print width: 1800mm - Color unit: 4 x 220 ml cartridges and 1.5 l color tank - Print resolution: 2400 dpi - Print modes: - 2 passes (360 x 1200 dpi): 110 m²/h - 3 passes (360 x 1800 dpi): 84 m²/h - 4 passes (720 x 1200 dpi): 74 m²/h - Media drying system: Integrated housing heaters, infrared heaters, and fan system - Interface: USB 3.0/LAN - Power specification: AC 220V ± 10%, 50/60 Hz - Dimensions: 3190 mm (L) x 650 mm (W) x 1030 mm (H) - Net weight: 400kg Condition: Display item, very few prints. All information provided without guarantee. Financing through our bank is also available. komplett-konzept.leasingo.de Fgodpfx Ajq Rd Nued Isd More printers in different sizes – new and used – can be found in our shop! International shipping rates on request!

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Fgjdpfszf H Nmox Ad Iod Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Fjdozf H Iiopfx Ad Iegd Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Year of construction: 2024, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Item no. 0576762. Piston force at 6 bar: 3000N. Max. clamping force: 30,000N. Further information available in the images. Purchased in 2024 for testing purposes only. Inspection is possible. Sold without warranty or return. Fgedpfx Adsvb Di Ts Iod

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Fodpfx Aezf H Hrsd Iogd Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572