Compressed air tank 20,000 liters

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Bsdpsya U U Uefx Aafjlc Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 7,000 rpm, spindle motor power: 34 W, Equipment: documentation/manual, rotational speed infinitely variable, Travelling column milling machine used with CNC H. TNC-530 Bodpjxyw Tfjfx Aafolc

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Blsdpfjya Hcqox Aafsc Table clamping surface: 630 x 500 mm Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Bsdeya E Thepfx Aafolc Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) Bodpfx Aot Nhqyeafjlc MAXIMUM CAPACITY 16 TON

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,500 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Pallet size: 1,740 x 650 mm Spindle taper: SK 50 Spindle speeds: 25 - 6,000 rpm Spindle overhang: 665 mm Distance spindle nose to table: 200 / 850 mm Spindle motor power: 18.5 kW Max. spindle torque: 758 Nm Feed rate - longitudinal/cross/vertical max.: 8 mm/min Rapid traverse longitudinal and cross: 26 m/min Rapid traverse vertical: 20 m/min Drilling capacity (solid): 50 mm Tapping capacity: M 45 Tool changer positions: 60 Tool diameter: 125 mm Tool diameter with 2 empty stations: 260 mm Max. tool length: 400 mm Max. tool weight: 20 kg Blsdpfx Aaoya E Rysfsc EQUIPMENT Chip conveyor Coolant device

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, The mast will be disassembled by the manufacturer prior to transport. The technical data is based on the original quotation. The seller assumes no liability for its accuracy. TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Mast type: DZ-V mast Lift height: 10,700 mm Height of mast (retracted): 4,100 mm Free lift: 3,456 mm Height of mast (extended): 11,344 mm Fork tilt forward: 2° Blsdpfx Aasyaawhofoc Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between wheel arms/loading platform: 940 mm MACHINE DETAILS Height to top of overhead guard (cab): 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panorama overhead guard Panorama rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video preparation Seat; leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-Ion 51.2 V 360 Ah Type IM Charger: SLH300 D400 48 V 150 A

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, ACCESSORIES Cooling / Coolan System Sí / Yes Internal Cooling / Coolan Through Spindle Yes / Yes Handwheel / Handwheel Yes / Yes Heidenhain Tool Probe / Tool Probe Heidenhain Yes / Yes Preparation for Renishaw Touch Probe / Preparation Renishaw Touch Probe Yes / Yes Bljdpfx Aajulwy Aefec Integral Splash Guard / Integral Splash Guard Yes / Yes Chip Conveyor (2 Augers + 1 Lateral hinge) / Chip Conveyor (2 Chip Augers + Lateral 1) Yes / Yes Automatic Tool Changer / ATC Yes / Yes (24 tools / tools)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 1,298 kg, load capacity: 120 kg, arm reach: 3,900 mm, controller manufacturer: KUKA, number of axes: 6, TECHNICAL DETAILS Axes: 6 Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % MACHINE DETAILS Robot control: KUKA Control protection class: IP54 Robot protection class: IP64 Blsdpfx Aasycqb Ajfsc Robot pedestal height: 1,500 mm Weight: 1,298 kg

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Bodpfx Aasycp Tkofolc MACHINE DETAILS (not available) EQUIPMENT (not available)

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead Bledpjw T Sd Tsfx Aafoc CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance Bledpfxeyanr Tj Aafjc - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine Blsdpfx Aasyanplsfoc • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Bjdpfx Aaot Tcz Ujfslc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h Blsdpfxeycp Nlo Aafjc EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.