Textile Tunnel Dryer

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm Nedpfx Aszcdkwjd Solc MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Condition: new, Year of construction: 2023, power: 1,150 kW (1,563.56 HP), total length: 6,460 mm, total width: 1,600 mm, total height: 1,840 mm, Selling price: € 129.500, US$ 147.500 Current frequency: 50 Hz Nlodpfx Aoxfrz Isd Sec Voltage: 400

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm Nedpfx Ajzcwfnsd Solc EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Nlodpjzdpqwofx Ad Sec Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Condition: good (used), Year of construction: 1980, Diesel emergency generator MWM Mercedes - AEG built in 1980 with switch cabinet, cooler. Nljdpfxet In Nyo Ad Ssc Diesel engine MWM 8 cylinder 405 HP Generator AEG Type:SIRI 100 D/4 330KVA .

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Nlsdpezdd Rgefx Ad Sec Safety device Mechanical tool clamping system (top)

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm CNC engraving and embossing machine – TSM series Type: TSM 15-10-UG Year of manufacture: 2012 Nlodszddzrspfx Ad Soc Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,681 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 23,000 kg, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER 620 GS-NL (Complete Package) Available complete natural gas power plant based on Jenbacher 620 GS-NL, already dismantled and ready for loading. The unit was stopped while running properly at full load. Maintenance All maintenance has been performed by official services, following the manufacturer’s schedule. Premium shortblock: completed in 2018 (report available). Skid / generating set components: 2008. Borescope inspection: available. Technical data Brand: Jenbacher Model: 620 GS-NL Power: 3,044 kW Fuel: Natural Gas Nlsdpfx Aeytgxfod Ssc Frequency: 50 Hz Total running hours: 19,681 h Voltage: 6,300 V Scope of supply (included) Genset Gas train “Diane Blue” Silencer Oil system Refrigeration system Transformer Switch breakers Auxiliaries cabinet Status / Availability Availability: Immediate The assets are already dismantled in our warehouse, ready to be loaded or inspected. For more information please contact us!

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Nljdpfozddwmox Ad Ssc Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Reinforced base frame Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Nodpfxozddb Eo Ad Selc Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: like new (used), Year of construction: 2019, operating hours: 10,800 h, For sale: complete containerized CHP (Combined Heat and Power) unit. Dimensions: 17x3x3.5 m (LxWxH). Equipped with MWM gas generator. Brand: MWM. Model: 2020 V20. Year of manufacture: 2019. Power output: 2000 kW. Voltage: 400 V. Operating hours: 10,800. In mint condition, ready for immediate use. Fitted with emergency cooler and exhaust heat exchanger. Njdjy Him Tepfx Ad Selc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Nledpfx Adszdqdfs Sec Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Nljdpezcwfujfx Ad Sec Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible. Nlsdpfsw R U Aaex Ad Soc

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. Nlodpfxjzclphj Ad Soc TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function