Cone Crusher Svedala

Condition: ready for operation (used), DRUM MOTORS drum motors used large stock of belt width 300-1400 mm Iasdpfx Aoi A Apuoh Nel

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Iasdpfxoiuky Io Ah Nel

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm Iajdod E A I Iepfx Ah Njl - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Iaodpfx Ahov S Hyvs Njl Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Iasdovwlqqopfx Ah Nel Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit Iaedpfjwcg Ersx Ah Nel

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz Iaedpfsu Nw Ezjx Ah Njl total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Condition: used, Year of construction: 2022, operating hours: 620 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity Iodpfx Asrwvvysh Njal * Cab with heater * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: good (used), functionality: fully functional, power: 239 kW (324.95 HP), overall weight: 50,500 kg, Year of construction: 2002, operating hours: 11,245 h, machine/vehicle number: CCC00513, 239 kW weight: 50,5 t engine complete overhauled Iedpfxslhqhmo Ah Neal tracks as new new cylinder-sealing

Condition: used, mileage: 47,821 km, power: 115 kW (156.36 HP), first registration: 07/1992, overall weight: 10,500 kg, fuel type: diesel, color: orange, tire size: 12,5 r20 mpt, gearing type: mechanical, operating hours: 3,241 h, machine/vehicle number: 3765, Equipment: all wheel drive, crane, differential lock, hydraulics, 1 used UNIMOG 1650 with Hiab 120 loading crane Internal number: 3765 First registration: 04/92 Read operating hours: approx. 3,241 Recorded mileage: approx. 47,821 km Power: 115 kW / 156 HP Permissible total weight: 10,500 kg PTO at bottom 2-circuit hydraulics 24 V electrics Tyres: 12.5 R20 MPT Hiab 120 loading crane 4x hydraulically extendable, radio remote control Lifting capacities: 2.0 m – 4,400 kg 10.1 m – 850 kg Iedjfh Nbcepfx Ah Nsal 4.6 m – 2,130 kg 11.9 m – 700 kg 8.2 m – 1,080 kg The very low-mounted crane frame ensures excellent stability of the UNIMOG, resulting in very high lifting capacities at the crane. This offer is non-binding. Subject to errors and prior sale!