Front loader forklift

LINDE H 35 T - 4745 h - Seitenschieber neu -

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. Nksdslc Du Njpfx Ahvsu If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Nsdpfeghgl Iox Ahveku Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Nkodpfx Aot Ucqfehveu Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm The press was in operation until the production line was shut down.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 817 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, Nedpfx Aevgh U Rohvjku 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Nkodpfx Aheu Tha Isveu Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system according to EN16500. Nkjdeu Aa Tnopfx Ahvsu All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Model: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of strapping channels: 4 Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Includes starter set of bale strapping, 19 mm Year of manufacture: 2004

Condition: new, Year of construction: 2016, 2-post lift 4.2 t – barrier-free – Professional Line TW 242PEB43 The Professional Line lift is designed for daily professional workshop use. Features include automatic release of the safety locks and two-stage swivel pads. Fully barrier-free drive-through area. The lift is also equipped with an automatic limit switch, which stops lifting as soon as an over-height vehicle reaches the crossbeam. Each outer side of the columns has a practical plug adapter holder, providing secure storage for two plug adapters each. Anti-Lift-Up button enables precise lowering of the lift without prior automatic lifting. Also includes a convenient 230 V socket directly mounted on the control box. * Top-quality workmanship with CE certification * Manufactured according to ISO 9001 * New: Anti-Lift-Up button * New: Practical 230 V socket on control box * Protective covers in front of the columns * Automatic locking and unlocking of safety latches * High-quality support columns made from special rolled profiles * 2 hydraulic cylinders for powerful lifting and lowering * Automatic arm locking mechanism * Synchronous control via wire ropes * Telescopic support arms * Practical plug adapter holders (one per column side) for two plug adapters each ----* CE lifting capacity: 4200 kg * Max. lifting height: 1900 mm / Ad 2080 * Swing-in height: 96 mm * Lifting/lowering time approx.: 45/30 sec. * Drive voltage: 400V / 3 phase * Power: 2.2 kW * Fuse: 16 A (C/slow-blow) * Net weight: 700 kg * Lifting height (swivel pads retracted): 1900 mm * Lifting height (swivel pads extended): 1960 mm * Lifting height (plug adapter + swivel pads extended): 2060 mm * Safety unlocking: automatic * Swivel pads: 2-stage * Powder coated: yes * Anti-Lift-Up button: yes * Total width/base plate (without motor): 3436 mm * Column height: 4300 mm * Required concrete thickness: 200 mm * Support arm length / short (approx.): 740 – 1150 mm * Support arm length / long (approx.): 890 – 1390 mm * Width between columns: 2850 mm * Max. drive-through height: 4135 mm * Max. drive-through width: 2574 mm * Color: RAL 5015 (Blue), RAL 7000 (Grey) ----Stock no. 93 -----Subject to errors & prior sale WhatsApp support available! If you have questions about the unit or require further information, feel free to contact us conveniently via WhatsApp. Nksdpfxjkpl Elo Ahvou WhatsApp – German, English -- WhatsApp – German, English, Arabic

Condition: used, mileage: 274,247 km, power: 235 kW (319.51 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Suitable for bulky waste and plastic, yellow bags, 3 seats differential lock, trailing axle liftable, stop brake for refuse collection vehicle, 3-seater, automatic air conditioning, ABS, ASR, disk brakes, central locking, cruise control, V-limiter 30/85 km/h, radio, rotating beacons, electr. Electric windows, lifting roof, central locking system, cornering light, camshaft output 650Nm with flange, reversing lock - running board circuit, left-hand drive, all rear view mirrors heatable and electric, electronic brake system, front sun blind, ECAS air suspension system, HALLER M 21 x1C plastic, yellow bags and bulky waste suitable, press force 40 t, without chute with integrated inch chute, BEKA-MAX - central lubrication system, tool box, 3 seats Nkjdpfx Ahef Dg U Tevou

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The indicated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and fitted with a new control system in accordance with EN16500. All replacement parts used are genuine Strautmann original parts. Nksdpsv Rzwmsfx Ahvju Technical specifications: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 600 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales per hour - Number of strapping channels: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: indoors / outdoors under cover - Including start set of 19 mm baling tape - Serial number: 610.01.588 - Year of manufacture: 2005

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A/4A Year 2018 Capacity 6500 kg Opening range 500-1300 mm Width 930 mm Pad 1200x270 ID OS1252 Nkjdpfx Ahst S Sq Hjvju