Forklift

Linde E16 P02 Evo

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 10,104 h, load capacity: 1,600 kg, lifting height: 4,770 mm, free lift: 1,644 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Iasdpfx Aex H U Ipsh Nsl Transmission: Dual pedal Condition: Refurbished, without warranty Technical condition: Good Front tire type: Non-marking Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 16x6-8 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are also happy to offer you leasing & financing as well as delivery at attractive rates. We also accept Linde equipment as trade-in, even if you do not purchase a unit from us. Operating hours displayed were recorded as of the date of listing. Subject to prior sale, changes, and errors. Side shifter, integrated side shifter, third valve, rear work light, front work light, full free lift, safety light, LED.

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling Ijdpfx Aheqwyclj Nsal X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,752 h, load capacity: 1,600 kg, lifting height: 3,070 mm, free lift: 1,474 mm, fuel type: electric, mast type: duplex, construction height: 2,080 mm, fork carriage width: 980 mm, fork length: 1,000 mm, drive type: Elektro, Electric 4-wheel forklift Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Technical condition: good Front tyres type: super elastic Front tyres size: 18x7-8 Front tyres condition: 60 - 80% Iedpfjwr N R Aox Ah Neal Rear tyres type: super elastic Rear tyres size: 16x6-8 Rear tyres condition: 60 - 80% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2017 Battery condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, call Please feel free to contact us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We are happy to inquire for you. Trade-in of Linde devices is also possible - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, integrated side shift 3rd valve, rear work light, front work light, full free lift, safety light, seat heating, LED,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,180 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Iedjwlwgxepfx Ah Nsal Technical condition: good Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires size: 16x6-8 Rear tires condition: 20 - 40% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us We are happy to help. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing and we will be happy to inquire about delivery at favorable conditions for you. Linde equipment can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, fork positioner, integrated fork positioner with side shift 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, full free lift, safety light, LED,

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Iasdpfx Aheiyx Uzs Nsl Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: new, Working width 3500 mm Iasded Rzc Ropfx Ah Njl Working height 2300 mm Number of cylinders 4 St.

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Iaedpob Auu Refx Ah Nsl Dust bag Location: Ex warehouse Bitburg

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm Iaedpfx Ahsxcp Sle Nsl - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2014, DMG MORI DMU 75 monoBLOCK Year of manufacture: 2014 Control system Siemens SINUMERIK 840D sl ShopMill Working area / Axes Traverse paths X / Y / Z: 750 / 650 / 560 mm 5-axis simultaneous machining NC swivel rotary table Table / Workpiece Table size: Ø 650 mm Max. table load: 600 kg Max. workpiece dimensions: Ø 840 mm, height 500 mm Spindle Tool holder: SK40 Max. speed: 18,000 rpm Through-spindle coolant (IKZ): 40 bar Feeds / Dynamics Rapid traverse X/Y/Z: 40 m/min Feed rate: up to 40,000 mm/min Acceleration: 6 m/s² Tool changer Chain magazine: 60 tool positions Max. tool weight: 8 kg Max. tool length: 315 mm Max. tool diameter: Ø 80 mm (adjacent positions occupied) Ø 160 mm (adjacent positions free) Tool change time (chip-to-chip): approx. 4.9 s Chip removal Chip conveyor Iedpex N H Rzjfx Ah Noal The machine is supplied with a newly packaged window/disc.

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. Iaodpfxjd S N I Ns Ah Nsl All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.