Full-container reach stacker

Linde C4535TL5

Condition: used, 4 tank containers made of stainless steel, used Contents: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data: according to type plate 1 container = -0.4/+4 bar operating pressure, 150 °C 1 container = -0.4/+3 bar operating pressure, 110 °C 1 container = +3 bar operating pressure, 120 °C Bjdjv Dtgaspfx Amrsln 1 container = +4 bar operating pressure, 130 °C Design: cyl. horizontal container in a 20' transport frame with curved bottoms half pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating pressure 50 mm insulation around cylinder and bottoms connections: 2 domes DN 500 on the upper apex line and various connections outlet in the front weight: approx. 4.4 tons if required: frame for 4 tank containers made of painted mild steel, dismantled for transport external dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height additional charge on request.

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Bjdepkyn Rspfx Amrjln

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Blsdpfxey Iwlas Amron Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) Bjdswmwrdopfx Amrsln with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Bedpfowwt Nmsx Amreln Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons. 28926ä

Condition: like new (used), All parts are for sale, complet. Bedpfxohi Tvbj Amrjln

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Bljdpfsu Idfrsx Amrsn Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories Bledpst Hwqkofx Amrjn

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm Bjdpfey S T T Uex Amrsln tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre Bodpfswvblajx Amrjln 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *