Fork Lift Truck

LINDE - GAS H25T

Year of construction: 1992, condition: used, Vollmer Saw blade shearing machine type NS 700 Itsdpfx Aokmnyfjgwep Year 1992

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo Crysta Apex C776 coordinate measuring machine Temperature compensation on all axes Active vibration isolation system from BILZ X-axis measuring range = 700 mm Y-axis measuring range = 700 mm Z-axis measuring range = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw PH10MQ probe head Renishaw SCR200 interchangeable rack Renishaw TP200 sensor Renishaw TP200 modules = 6 units MCosmos measuring software WIN10 PC system, 27" monitor Reference sphere / calibration sphere Optional software upgrade Optional hardware upgrade Full service available upon request Isdowhfh Aspfx Agwjtp

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Itedpfsnfvx Nox Agwop A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2009, condition: refurbished (used), ILPRA FOODPACK ID.NO. 2114 Ijdpfx Asg R St Hogwotp Ilpra Foodpack tray sealer with 4x associated tools year of year 2009. Tool no. 1. Semi-gastro 325 x 265 mm. No. 2. 220 x 175 mm. No. 3. 165 x 120 mm No. 4. Oval approx. 100 x 75 mm. Dimensions machine 500 x 85 cm H 160 cm

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! Itodpfx Aged S Efajwsp MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 Itedsu Rt Nxjpfx Agwop turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. Isdpsi D Dgwsfx Agwstp The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Itsdpfx Aohgihkogwjp Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2023, new arrivals immediately available, refrigeration system with integrated free cooling SBSF 330, 330KW at flow 7°C, low GWP refrigerant R454B. internal P3 pump, internal 300l buffer tank, internal expansion tank, quiet version with compressor hoods, Modbus RS485, winter package for low ambient temperatures, flange connections Iodpfxofnrwhe Agwstp

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Itsdjnh R Ekopfx Agwep OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site