Tanker semitrailer

LAG 20 FT ADR Chassis & 35m³ SWAP L4BH / MIETE

Container Chassis 20FT:

Fifth Wheel Height: 1180 mm (unladen, air-suspended tractor unit)

Suitable for transporting containers:
- 1 x 20FT ISO container
- 1 x 20FT (7150) swap body
- 1 x 20FT (7450) swap body
- 1 x 20FT (7820) swap body

Three-axle SAF INTRA DISC PLUS SBS2220 axle assembly with disc brakes (large 430 mm discs).
INTRA air suspension with steel spring hangers.
The axles are air-suspended, with axle 1 as a lift axle, automatically controlled via EBS.

6 aluminum rims U 22.5 x 11.75 – TIA brand – polished finish – offset 120 mm
WABCO EBS-E electronic braking system, Type 2S/2M (ABS on 1 axle), with RSS system (roll stability) and pneumatic hand parking brake on 2 axles, compliant with regulations.
WABCO OptiTire tire pressure monitoring system (TPMS)
JOST MODUL B landing gears, configuration with plates and oscillating feet (S), load capacity 2x12,000 kg, mechanical operation
1 PVC toolbox (1,040x490x480 mm), mounted on the right
Stainless steel drip tray with removable aluminum cover plate.
Next to the drip tray on left and right: working platforms with aluminum safety grating cover.
Aluminum catwalk behind the 20FT fitting above the third axle on both sides.
Between the longitudinal beams: 2 PE hose tubes, Ø 160 mm, length 6,200 mm, with PE end caps at the front.
At the rear, the hose tubes are equipped with separate, lockable stainless steel covers (Ø 160 mm).
1 foldable ADR sign at the rear
Vehicle type according to ADR: EX/II + EX/III + FL + AT

Container:
Type: CIMC Longitudinal Swap Body Tank (CLS)
Capacity: 35,000 liters
Tare weight: 4,130 kg
Max. operating pressure: 3.0 bar
Test pressure: 4.5 bar
Temperature range: –40°C to +130°C
Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC
Shell: 1.4402 (316L), 3.2 mm, 2B finish
Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished
Baffle plates: 4× vertical, CVC-shaped, corrugated, 70% welded
Internal finish: degreased, pickled, passivated, neutralized
Kedpfxjyqiy Ts Afgelt
Ladder: stainless steel, right rear, theft-proof
Catwalk: aluminum, non-slip, 475 mm wide, with cross steps
Handrail: foldable, telescopic, theft-proof
Stackable: up to 3-high
Manhole: Ø500 mm, 316 stainless steel, 8-point, EPDM/PTFE
Inspection openings: 3× Ø300 mm, 316 stainless steel, 4-point
Safety valve: 3", stainless steel, 3.75 bar, without flame arrestor, with bursting disc & pressure gauge
Air line: 1.5", with ball, safety & check valves, gauge operable from below
Vacuum valve: 2" BSP, –0.21 bar
Bottom valve: 3", cable remote closure
Steam heating: 8 longitudinal runs, 1" BSP, 3 bar
Thermometer: analog, –40°C to +160°C
Insulation:
- 50 mm rock wool (tank & ends)
- PU foam under stainless steel bands
Cladding:
- Shell: 4× 1.8 mm GRP panels
Marking: 3× holders for Edgar Weber flip panels, 1× Kemmler holder

Subject to prior sale and errors excepted!

Sale exclusively in accordance with our General Terms and Conditions

Important Note — Important Information: Despite our careful inspection of all details in this offer, errors may occur. Some may be due to transfer errors within the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute legal entitlement.

Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contractual initiation. The details provided here are without guarantee and do not constitute warranted properties.

The listing was translated automatically. Translation errors are possible.