All terrain crane

Klaas K 23/33 TSR

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch Iedpfx Aow Eqdkshvjap

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Iedpfx Ajqakbrohveap Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 Isdpfew S Ii Nox Ahvoap - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Iajdeyiyg Iopfx Ahvjp Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,700 kg, fuel type: diesel, color: original, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, maximum load weight: 1,000 kg, gearing type: automatic, axle configuration: 4x4, suspension: other, tire condition: 100 %, number of seats: 1, brakes: other, lifting power: 1,000 kg/m, shovel volume: 1 m³, digging bucket width: 360 mm, emission class: euro5, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW, PERKINS COMBINATION EXCAVATOR - BRAND NEW!! NEW!! NEU!! NEW!! NET PRICE: €18,900 FOR BUYERS IN THE EUROPEAN UNION!! FÜR KÄUFER DER EUROPÄISCHEN UNION!! THE MACHINES ARE LOCATED IN MAJSKE POLJANE, GLINA!! PRICE: €18,900 NET + VAT IN CROATIA. OUTSIDE OF CROATIA, VAT IS NOT PAYABLE!! WEIGHT: 2,700 KG WIDTH: 1.65 m LENGTH: 5.00 m HEIGHT: 2.40 m WORKING REACH OF REAR HYDRAULIC DIGGING ARM: 3.50 m DIGGING BUCKET: 33 CM. VARIOUS BUCKET SIZES, HAMMER, ETC. AVAILABLE FOR PURCHASE. FRONT LOADING BUCKET WITH QUICK COUPLER. 0.800 m2. PALLET FORKS, QUICK COUPLER!! I ONLY RESPOND TO SERIOUS INQUIRIES. PLEASE, SERIOUS CALLERS ONLY. Iaedow Tkmyopfx Ahvep NO EXCHANGES, NO ACCOUNTS, ETC. ACCEPTED. BANK LOAN OR LEASING OFFERS AVAILABLE UPON REQUEST. ALSO OFFERING: - KUBOTA: €18,900, approx. 3 tons - YANMAR: €27,900, approx. 3.7 tons

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm Iedpefxgp Ujfx Ahvoap faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. Iajdpfx Ajxnvq Eohvep V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 Iajdpfx Ahowa I Shovop total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Iedpsq N E U Ajfx Ahvsap Number of working hours 270 h electrical ja

Condition: used, Year of construction: 2014, CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT Ijdownhanjpfx Ahvjap VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets