Diesel Forklift

Kalmar DCG90-6

Condition: good (used), machine/vehicle number: 3288, Year of construction: 2015, load capacity: 9,000 kg, lifting height: 5,050 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 4,640 mm, total width: 2,460 mm, operation weight: 16,060 kg, additional equipment features: Fire extinguisher , Dual tread, Manual sliding cabin, Front mud guards, Rear mud guards, Warning triangle, Equipment: lighting, Kalmar DCG90-6 from Uniktruck Lsdpfsul D Nkjx Ad Norg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Ledpfx Ajw Ucyuod Norg Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Lrodpfow Ew T Ssx Ad Nsg Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: Lsdpfx Aouwv H Tjd Njrg -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: Lodsrz Nfljpfx Ad Njrg The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Lredsmmfwuopfx Ad Nsg Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off Ljdpfx Adjvkkl To Norg - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC Control: FANUC 160i Software: Quinto 4.3 Activated software options (option numbers): 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel range: +150°/ -60° C’-axis swivel range: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0 – 10,000 rpm Max spindle power: 26 kW HSK 80 interface Max. number of wheels: 6 Workpiece spindle head: Vmax: 180°/s Drive power: 1.6 kW ISO 50 interface Precision (resolution): Linear axis resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3,100 mm Width: 1,915 mm Height: 2,190 mm Weight: 8,500 kg U-axis is integrated with steady rest, clamping cylinder, and tailstock Ljdpfou A Dn Nex Ad Norg 6-pallet loader (diameter 3 to 32 mm) 64 plastic collets Technical data subject to change without notice

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l Lsdsfxyhfepfx Ad Nsrg

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes Lrsdpjxur Sxjfx Ad Nog X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800