Diesel Forklift

Kalmar DCG250-12

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 20,657 h, load capacity: 25,000 kg, lifting height: 4,060 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, fork carriage width: 3,050 mm, fork length: 2,340 mm, empty load weight: 34,800 kg, total length: 6,300 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Codpfxou Dzaxj Ab Tehf Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Front tires size: 14.00-24 Rear tires Type: Air Rear tires Size: 14.00-24 Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DCG 250-12LB P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, scales,

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Chodpeh Hxubjfx Ab Tof Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: good (used), machine/vehicle number: 2832, Year of construction: 2023, load capacity: 25,000 kg, lifting height: 3,920 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 7,005 mm, total width: 3,000 mm, operation weight: 33,800 kg, additional equipment features: Rear mud guards, Front mud guards, Equipment: lighting, Kalmar DCG250-12 from Uniktruck Chodpequwnlofx Ab Tof

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 25,000 kg, lifting height: 4,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, construction height: 3,820 mm, power: 168 kW (228.42 HP), motor manufacturer: Cammins, gearing type: automatic, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 250 mm, fork thickness: 110 mm, ground clearance: 300 mm, turning radius (inner): 425 mm, turning radius (outer): 5,875 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 14.00 × 25, rear tire type: pneumatic tires (air-filled), rear tire size: 14.00 × 25, overall weight: 32,900 kg, total height: 3,270 mm, total length: 6,090 mm, total width: 3,050 mm, color: red, motor model: Turbo-Intercooler (Stage V / Tier 4 Final), Equipment: CE marking, air conditioning, cabin, front guard, full service history, head guard, lighting, pallet forks, retractable fork, sideshift, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 0 Max. lifting capacity: 25,000 kg Max. lift height: 4.00 m Chsdoxf Ebnspfx Ab Tsf Mast type: Duplex Fork length: 2,400 mm Side-shift / Fork positioner: Yes (with fork positioner) Drive: Diesel Transmission: Automatic (DANA-TE14) Cab: Enclosed Heated cab: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Volvo Emission class: Stage V Weight: 34,820 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available ReachForks, fork positioner and side-shift included === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available on request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €289,500 (EXW / excluding VAT). Heavy-duty diesel forklift with 25,000 kg capacity and 4 m lift height. Equipped with Duplex mast, enclosed climate-controlled cab and automatic DANA-TE14 transmission. Ideal for steel, ports and heavy manufacturing. CE certified and ready for immediate use. === DELIVERY === Crane loading available on request for hassle-free dispatch. Flexible shipping options tailored to your destination and logistics preferences. All shipping handled professionally by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacities: Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Chjdpfswx Hicex Ab Tof Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 25,000 kg, lifting height: 3,500 mm, free lift: 1,750 mm, fuel type: diesel, mast type: duplex, construction height: 3,670 mm, power: 185 kW (251.53 HP), fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Load centre: 1200 mm Cedoq D S Dkopfx Ab Tjhf Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Dana TE14000 Condition: New equipment Technical condition: New Front tyre type: Pneumatic Front tyre size: 14.00 x 24 Rear tyre type: Pneumatic Rear tyre size: 14.00 x 24 Side shifter, fork positioner, 3rd valve, 4th valve, Kalmar comfort cabin: EGO air conditioning ECC with fresh air filter, tinted windows and laminated safety glass windscreen, door holder for open door (left side), sunblind for roof window, air-suspended and reinforced leather Grammer Actimo XL driver's seat with seat heating, lap belt and horizontal suspension, Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming, 12/24V power inverter incl. 2 x 12V and 2 x 24V sockets, load weight indicator in display, direction selector switch integrated in lift hydraulic lever, 2 additional external mirrors mounted on B-pillars, LED rotating beacon, height adjustable, KALMAR SV/GV carriage with centre level compensation, width B = 3,000 mm, Kalmar forks, fork length l = 2,400 mm, fork cross-section b x a = 250 x 110 mm, Terminal-West quick-change system for SV/GV fork carriage, forks tapered 500 mm from fork shank to 15 mm at the tip, elevated air intake for air filter incl. pre-separator, engine heater 220V, accumulator for lift hydraulics, separate tanks for brake and working hydraulics incl. hydraulic oil cooler, mudguards on drive axle, mudguards on steering axle, anti-slip coating on front wheel covers and tank, 2 extra LED headlights in mast below standard headlights, 2 extra LED headlights on front cab corners oriented in driving direction, 6 extra LED headlights on rear cab corners with guard, 2 extra LED headlights on wheel covers, electronic inching - enables precise low-speed driving with simultaneous full lift speed, acoustic reverse warning signal - multi-frequency bass tone (only audible in the immediate vicinity of the machine), automatic central lubrication system on steering axle and fork carriage, 6 kg (powder) fire extinguisher EN3, reversing camera mounted on cab roof with monitor (colour) in cab, mast camera linked to the in-cab monitor (in combination with reverse camera), Monitor HD 7 QUAD-view, tyre pressure monitoring integrated in display.

Condition: good (used), machine/vehicle number: 3428, Year of construction: 2015, load capacity: 20,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total width: 3,050 mm, operation weight: 34,380 kg, Kalmar DCG250-12 from Uniktruck Chedpfx Aov Rrb Aeb Tef

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Cjdsxtpqvjpfx Ab Tjhf

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Chsdpfx Abjwlu Nds Tef Max. Bar diameter: 35 mm Turning length: 600 mm Spindle speed 6,000 min-1 Counter spindle 12-position turret with driven tool Chip conveyor FMB bar feeder SL 80V

Condition: like new (used), Year of construction: 2012, operating hours: 6,589 h, functionality: fully functional, We are selling a beautiful POSMILL E1100 machining center, built in 2012. The machine has few spindle hours (6,589) and was used for single-part production. The machine is ready for demonstration with power at the delivery point. Technical specifications: X-axis 1,100 mm Y-axis 600 mm Z-axis 510 mm Spindle/table distance 120-630 mm Table dimensions 1,300 x 600 mm ITNC 530 control system Csdpfx Aowkhy Tsb Tshf - ITNC 530 control system - 35.1 tool measurement system - Workpiece measurement system with probe - Linear measuring system in all axes - Internal coolant supply for internal machining - Various tools with holders - Chip conveyor - Filter system - Workshop trolley with holder - Vice