Diesel Forklift

Kalmar DCG160-12

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 155 h, load capacity: 16,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,695 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,680 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,450 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Superelastic Ndsdpfx Afsz Ewdxe Ssb Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG160-12. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner, Heater, full cabin, air conditioning.

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg Ndodoi Eg Nkspfx Af Ssb

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 375 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 25,200 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Nodez Ewczspfx Af Sjdb Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG160-12. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly offer your vehicle for consignment sale at our location. Side shifter, fork positioner Fork positioner opening range: 700 / 2360 mm Heater, full cabin, full free lift

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 27,246 h, load capacity: 16,000 kg, lifting height: 3,030 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 2,600 mm, fork length: 2,500 mm, empty load weight: 23,120 kg, total length: 5,575 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG 160-12. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom modifications for forklifts weighing 8 tons and above. We would also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner Fork positioner opening range: 700 / 2395 mm Nodpez Ev Ucjfx Af Ssdb Heater, full cabin

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment Ndodpfx Afjx Sxfvo Sjb 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: new, Year of construction: 2024, load capacity: 16,000 kg, lifting height: 5,110 mm, total length: 8,045 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 Njdpfx Afsxd Hutj Ssdb · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräde · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: used, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 5,260 mm, fork length: 2,400 mm, total length: 7,410 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 Njdpjz Db Ufofx Af Ssdb · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Ndedpfsur N Daox Af Seb Year of construction 1970 The machine is ready for immediate use!

Condition: good (used), machine/vehicle number: 3506, Year of construction: 2016, load capacity: 16,000 kg, lifting height: 10,000 mm, mast type: duplex, total length: 5,500 mm, total width: 2,890 mm, operation weight: 29,100 kg, additional equipment features: Centralized greasing system, Dual tread, Front mud guards, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Nedpeyuilkjfx Af Sodb Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), machine/vehicle number: 2708, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Centralized greasing system, Engine heater, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Nsdpjyuhr Njfx Af Ssdb Wheel size – Steering wheel: 12.00-20

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Njdpfx Ajyn Em Rjf Sodb Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Ndodpfx Afoyuhr As Sob Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: used, Year of construction: 2025, lifting height: 4,500 mm, fuel type: diesel, motor manufacturer: Cummins-Diesel, Lifting capacity: 16.000 kg Nodpfx Ajznw E Djf Sjdb Please contact Sales Team for more information

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Nodpfjyid Iyex Af Sedb Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: good (used), machine/vehicle number: 3441, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 24,000 kg, additional equipment features: Dual tread, Centralized greasing system, NATO-socket, Manual sliding cabin, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Ndedpfx Asyuihrjf Seb