Forklift

Kalmar DCG150-6

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 15,799 h, load capacity: 15,000 kg, lifting height: 3,070 mm, free lift: 1,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, fork carriage width: 2,500 mm, empty load weight: 19,100 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,300 mm, Diesel Forklift Load Centre: 600 Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 12.00-20 Rear Tyres Type: Superelastic Rear Tyres Size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Lease-purchase & financing at attractive terms are always available. We are also happy to purchase your used vehicle outright, even if you do not buy a vehicle from us. Our proprietor, Mr. Peter Sawitzki, will be happy to advise you in detail about this DCG150-6. Dodpoxxnmmjfx Ac Hjci P.S.: Our master forklift workshop is specialised in repair, servicing, refurbishment, and custom builds for forklifts from 8 tonnes upwards. We can also offer to sell your vehicle on consignment at our facility. Sideshift, Fork Positioner, Heater, Full Cabin, Full Free Lift, Rotating Seat

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) Dedpfx Aewzwu Ioc Hoci 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 15,554 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,445 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 18,400 kg, total length: 5,055 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Dcedpfx Acju Dzkko Hji Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DCG 150-6 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab,

Condition: used, Year of construction: 2017, operating hours: 17,185 h, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * Year of manufacture: 2017 * Operating hours: 17,185 * Diesel * Forks hydraulically adjustable in width ----Internal vehicle number 10625-----Errors & interim sale reserved WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp Dcedov H Nazepfx Ac Hoi Whatsapp Whatsapp

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Dodpev S Su Sjfx Ac Hoci

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Djdpfx Aeu T Hg Tec Heci

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. Dcjdpfx Aer A Hcbsc Hji The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm Dsdpfx Aceyv Ipfj Hsci max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, Dsdpexp Hhdefx Ac Hoci 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Dodjw Dcdyopfx Ac Hoci Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings