Diesel Forklift

Kalmar DCG120-6

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 17,619 h, load capacity: 12,000 kg, lifting height: 3,250 mm, fuel type: diesel, mast type: simplex, construction height: 3,140 mm, fork carriage width: 2,450 mm, fork length: 2,400 mm, empty load weight: 20,060 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 other heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing and financing options are always available at attractive terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this DCG120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle on consignment sale. Dljdpfou Uwcbex Ab Tja Sideshift, fork positioner, Heater, full cabin,

Condition: used, Year of construction: 2007, Bending length 3050 mm Max. prebending capacity 13 mm Max. rolling capacity 16 mm Top roll dia. 340 mm Lower roll dia. 340 mm Side rolls dia. 240 mm 4-rolls Fully hydraulic Hydraulic drop end Digital read out of roll positions Dsdpfxexhgqio Ab Tola Equipped with: Top support Side support

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,400 h, load capacity: 12,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,800 mm, power: 168 kW (228.42 HP), fork length: 1,800 mm, empty load weight: 17,800 kg, total length: 4,700 mm, drive type: Diesel, construction width: 1,500 mm, Heavy-duty forklift – Diesel Load center: 600 Fork width: 200 mm Fork thickness: 700 mm Dedpfjxd Id Njx Ab Tsla Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: standard Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, twin tires,

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: A40401385, Year of construction: 2017, operating hours: 28,612 h, load capacity: 12,000 kg, lifting height: 4,930 mm, load center: 600 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, TECHNICAL DETAILS Lift height: 4,930 mm Load capacity: 12,000 kg Load center: 600 mm Dlsdpfxsv N I Hfj Ab Toa Mast Type: Standard Mast height: 4,070 mm Sideshift: Available Fork positioner: 570 / 2,320 mm Fork carriage width: 2,450 mm Forks: 200 x 70 x 1,800 mm MACHINE DETAILS Total weight: 13,700 kg Engine: Diesel, Cummins Operating hours: 28,612 h Length: 4,660 mm Width: 2,520 mm Forklift height: 3,050 mm EQUIPMENT - Tires 12.00-20 - Standard mast with sideshift and fork positioner - Cabin with Heating Windshield damaged

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal Dledon Smtqopfx Ab Toa Motor power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Djdslff H Eepfx Ab Tsla Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Dledpfxoixqg Ns Ab Toa Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Dlsdpow N Iz Hsfx Ab Tsa Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 35313, Ficep Rapid 35T Automatic Drilling & Sawing Line Automatic CNC high-speed drilling and sawing line for angles/miters: RAPID 35T Angle size (410 N/mm²) (min. mm): 60x60x6 Angle size (410 N/mm²) (max. mm): 350x350x40 Drilling heads (qty): 2 Drilling tools per head (number): 3 (6) Drilling diameter (mm): 40 Spindle power (kW): 19 (27) Spindle speed (max. RPM): 3500 Spindle stroke (mm): 200 Cutting unit: Circular saw The feed and discharge lengths for this line are as follows: Feed: 16M Dledpfxet Nzlqs Ab Toa Discharge: 12M If you would like more photos or information, please contact us.

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. Dodpforr Sqlsx Ab Tela The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.