Forklift
Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Name: Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT
Brand: Kalmar
Availability: InStock

Year of construction

2023

Condition

Used

Location

Andelst

Forklift Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Show map

Machine data

Machine type:: Forklift

Manufacturer:: Kalmar

Model:: DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Year of construction:: 2023

Condition:: excellent (used)

Operating hours:: 106 h

Price & Location

Location:: Andelst, Netherlands

Call

Technical details

Lifting height:: 5,000 mm

Fuel type:: diesel

Mast type:: triplex

Power:: 185 kW (251.53 HP)

Gearing type:: automatic

Fork length:: 3,000 mm

Color:: red

Details about the offer

Listing ID:: A18657016

Reference number:: 1790247

Update:: 14.03.2026

Description

= Additional options and accessories =

- Twin tires

= Further information =

Transmission: Hydrodynamic powershift, 3 gears, automatic
Year of manufacture: 2023
Unladen weight: 46,760 kg
Lifting capacity: 33,000 kg
Overall height: 370 cm
CE marking: yes
Technical condition: very good
Visual condition: very good

KALMAR DCG 330-12 FORKLIFT
TRIPLEX FULL FREE LIFT
FORK SHAFT SYSTEM
33,000 KG @ 120 CM LOAD CENTER
SHORT WHEELBASE = 475 CM
FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM
FRONT AND REARVIEW CAMERAS
TIRE PRESSURE MONITORING
CENTRAL LUBRICATION SYSTEM
LED LIGHTING PACKAGE

CHASSIS/BODY:
- Tow pin
- Steps with anti-slip protection
- Rear-view mirrors on the left and right, mounted on the front fenders
- Heavy-duty and protective fenders

CABIN:
- EGO cab
- Clear and toughened safety glass windows, thickness 6 mm
- Clear side windows including sliding windows in both doors
- Full doors with locks left and right
- Full control panel right console with light control, rotary switch for display, levers for load handling system (electrically adjustable, dual function)
- Multifunction lever on the left including horn, indicators
- Brake system with pedals left and right
- Interior comfort including mirror, handles, interior lighting, etc.
- Front, rear, and roof window wipers and washers
- Hydraulic steering including electrically height-adjustable steering wheel, manually adjustable sideways and lengthwise, with steering knob
- External reversing lights
- Tilt cab
- Grab handle, left side
- Automatic heating and ventilation (ECH) with fresh air filter
- Cruise control pedal, right side
- Kalmar standard key system
- Cup holder
- Coat hook
Hnjdpfev Hn D Esx Ai Nek
- Color display: fuel level, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, hour meter, service interval display, speed, engine RPM, various pop-up information, AdBlue level

STEERING SYSTEM:
- Kalmar steering axle with double-acting steering cylinder

DRIVELINE:
- Axletech drive axle

HYDRAULICS:
- Electric servo
- Sight glass on hydraulic oil tank
- Variable displacement pumps
- High-pressure filter
- Automatic engine speed increase when using the load handling function
- Standard tilt angle 5° forward/10° backward

ELECTRICAL SYSTEM:
- Electrical system 24V
- Rear and brake lights, LED
- LED work lights on front fenders
- 2 mast-mounted work lights
- LED indicators including hazard warning
- Master switch

WHEELS:
- Michelin 16.00x25

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2012

217 listings online

Call

Send inquiry

Telephone & Fax

+31 488 2... show

These listings may also fit your interest.

Listing

Universal machining center Deckel Maho DMU 80 P Hi-Dyn

Hagen

18,523 km

Universal machining center
Deckel MahoDMU 80 P Hi-Dyn

Call

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor Hsdpfx Aiox Dlf Re Njnk High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

See details

Listing

Cantilever rack 3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

Bad Feilnbach

18,479 km

Cantilever rack
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

€2,550

ONO plus VAT

Call

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) Hnodpfxjqt Dmys Ai Nsk - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

See details

Listing

Hydraulic press Hans Schoen UTE FF 300/80

Wermelskirchen

18,554 km

Hydraulic press
Hans SchoenUTE FF 300/80

Call

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Hodpfx Aiotiwgij Njnk

See details

Listing

Burgoberbach

18,497 km

4-wheel forklift
HysterS5.5FT Gas

Call

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Hodpswalyijfx Ai Nsnk Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

See details

Listing

Germany

18,510 km

Decoiler - expansion mandrel 20 t
SAG

Call

Listing

Siedlce

17,614 km

Gantry crane
CORMAKPK2

€755

Fixed price plus VAT

Call

Condition: new, functionality: fully functional, Year of construction: 2026, Product characteristics: The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Hnodpfx Aisridh Ne Nek Load capacity: 2000 kg Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

See details

Listing

Wiefelstede

18,341 km

Scrubber dryer
FakierECO50B

€550

Fixed price plus VAT

Call

Listing

Wuppertal

18,549 km

Spotting Press
HESSMERT160 EST

Call

Listing

Vertical machining center Mikron UCP 800 Duro

Barcelona

19,424 km

Vertical machining center
MikronUCP 800 Duro

Call

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Hodpfx Aisx D Ux Ts Nonk Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

See details

Listing