Front loader

Kalmar DCE 120 - 12

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 22,275 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,015 mm, fork length: 240 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Side shifter, fork positioner 3rd valve, 4th valve Tedpoz Ddgkofx Amrjc Full cabin

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Tjdpfx Amoyr Dmdjrjc Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: T33105.1687, Year of construction: 2006, operating hours: 22,275 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,015 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12,000 kg Load center: 1,200 mm Lifting height: 5,000 mm Load capacity at load center 1,200 mm: 12,000 kg Load capacity at load center 1,500 mm: 10,500 kg Load capacity at load center 1,800 mm: 9,000 kg Tsdpfxezu Nkfs Amroc Front overhang C: 205 mm MACHINE DETAILS Mast type: Simplex Drive type: Diesel Overall height: 4,015 mm Weight: 21,000 kg EQUIPMENT Side shifter Fork positioner 3rd hydraulic valve 4th hydraulic valve Heater Full cab Air conditioning

Condition: used, operating hours: 18,000 h, KALMAR DCE 120 - 12 DIESEL Forklift YEAR OF MANUFACTURE: 2008 ● Enclosed cab ● Rotating beacon ● 3 hydraulic functions: side shift, clamp open/close, and lift/lower ● Approx. 5m lift height ● Operating weight: 21,500 kg ● Load capacity: 12,000 kg ● 13,880 operating hours ● Air conditioning ● LED rear lights ● LED work lights front and rear ● Grammer comfort seat ● Good tire tread Tedpfxjwmpihs Amrec - German forklift! - 1st owner Subject to errors and prior sale!

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed Tsdjyl Uh Sspfx Amroc 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Tsdpewmlknofx Amroc Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Max helical angle 45° Internal and external Head. 44/50 kW. Tsdpswdmy Eofx Amrsc

Condition: used, machine/vehicle number: 15355, Year of construction: 2008, operating hours: 15,561 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 15355 Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lifting height: 5,500 mm Read operating hours: 15,561 h Tsdpfx Astw Dfwsmrec Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full cabin * Heating * Front work lights * Rear work lights ---- Further device information: Without fork carrier Rotating beacon Radio Single pedal ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information provided without guarantee, errors and changes reserved.

Condition: good (used), Year of construction: 1996, Manufacturer: Tacchi Model: HD 1450 CNC STI Year of manufacture: 1996 Control: NUM With accessories. In excellent condition. Tjdpsy Ny I Tofx Amrec Technical specifications: Swing diameter over bed: 1,450 mm Swing diameter over cross slide: 1,000 mm Chuck diameter: 1,200 mm Maximum turning length: 4,000 mm Spindle bore: 150 mm Spindle speed: 560 rpm Capsule holder Machine weight: approx. 15 tons

Condition: used, Year of construction: 2008, fuel type: gas, weight max. in kg 5.500 kg Number of working hours 2739 h Tsdpfxeww Ngnj Amrec weight of the machine ca. 8,59 t