Diesel Forklift

Kalmar DCD 55-6 HLB - CONTAINERFÄHIG !!!!

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 5 STILLIG WARIABEL GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW 6 MOVING SAWS HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY Ihedjvtc D Tspfx Ah Not MORE INFO, PICTURES BY E-MAIL..

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: red, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions Load diagram: 4.6m-4195kg, 6m-3091kg, 7.90m-2254kg, 10.10m-1720kg, 12.20m-1398kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdpfx Aoi Rp T Ieh Nsht - .

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Ijdswn D Izepfx Ah Noht Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: Ihsdpswclkyefx Ah Njt - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Year of construction: 2005, condition: used, HIT mechanization for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m consisting of different parts to be delivered individually or completely - layer cross pusher - various cross conveyors - workpiece roller conveyors - heavy duty roller conveyors Iodpfjpiurmsx Ah Nsht - 5 lifting tables with 2 cross conveyors each mounted on traversing carriages - stacker - control cabinets - Roller rails - Travelling binder cut-off saw with waste disposal system

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening Iodpfx Ajwh U Dmoh Nsht  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: excellent (used), Carbide saw grinder VOLLMER model Unimat S with cabin Isdpfx Aou Sztxeh Njht

Condition: new, New manufactured sawline with chipper canters and circular saws. Suitable for producing for example sawn wood for pallet production. Iedpfxowzklao Ah Noht Capacity per one shift approx 70 to 90 m3 ready sawn wood. Min log diameters 12 cm Max log diameters 38 cm Log length from 2 to 4 meters

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Isdpfx Aohvidgjh Nsht Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 174 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 2,405 mm, fuel type: electric, mast type: duplex, construction height: 3,500 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25 x 15 Rear tires Type: Superelastic Rear tires Size: 8.25 x 15 Battery Volt: 80V Battery Ah: 1120Ah Iedpfx Ahsq E A Uzs Njht Battery year of construction: 2022 Description: Fork positioner, sideshift, Kalmar comfort cab with heating and air conditioning, radio, battery 80 V / 1120 Ah - Nexsys - MAINTENANCE-FREE, charger, 2 LED work lights at the front on the lift mast, 2 LED work lights at the front on the roof, 2 LED work lights at the rear on the roof, indicators at the front and rear, reversing camera, safety light, safety light, rear lights at the front and rear. rear, Rear view camera, Safety-Light, Rear view mirror, Fork positioner, Sideshift, Kalmar comfort cabin with heating and air conditioning, radio, Battery 80 V / 1120 Ah - Nexsys - MAINTENANCE FREE, charger, 2 LED work lights at the front of the lifting mast, 2 LED work lights at the front of the roof, 2 LED work lights at the rear of the roof, Turn signals front and rear, backup camera, Safety light, Rear view mirror, Sideshift, Fork positioner, 3rd valve, 4th valve, air conditioning, scales,