Tow Tugs

Jungheinrich EZS130

Condition: used, functionality: limited functionality, Year of construction: 2023, operating hours: 1,937 h, load capacity: 3,000 kg, fuel type: electric, drive type: Elektro, Tractor Condition: Ready for use and fully functional Pedpfxsy Iiuyo Ahcora Technical condition: poor Battery voltage: 24V

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Prsdpfow Nklhex Ahcea Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2013, operating hours: 6,650 h, Tractor unit. Jungheinrich EZS 130 – used: Psdezp Rydepfx Ahcora Price ex works: €850.00 (net)! Manufacturer: Jungheinrich Type: EZS 130 Year of manufacture: 2013 Serial number: 91575965 Rated pulling force 60 min: 600 N Rated pulling force 5 min: 2,000 N Drive power: 2.8 kW Unladen weight without battery: 390 kg Battery weight min/max: 209/231 kg Operating hours: approx. 6,650 hours 24V Condition: good Available: immediately Location: Leipzig

Condition: used, machine/vehicle number: IC1459, Year of construction: 2019, operating hours: 1,142 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, 5246415 Serial Number: 91635421 Predpfxsztifae Ahcsa Fault: E0132

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: Prjdpfx Ahexrpm Uscoa - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: used, machine/vehicle number: IC1106, Year of construction: 2018, operating hours: 1,590 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, 4758358 Predpow Un E Njfx Ahcsa Serial Number: 91632059 Internationaler Transport möglich/ International delivery available

Condition: used, machine/vehicle number: 5126692, Year of construction: 2018, operating hours: 7,012 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, 5126692 Predeyza Svjpfx Ahcsa Internationaler Transport möglich/ International delivery available

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Psdow E H E Repfx Ahcjra Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, machine/vehicle number: 5126690, Year of construction: 2018, operating hours: 2,447 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, 5126691 Internationaler Transport möglich/ International delivery available Prodpfx Ajyza Spshcoa

Condition: used, machine/vehicle number: 16573, Year of construction: 2015, operating hours: 7,026 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, construction height: 1,950 mm, battery voltage: 24 V, front tire size: , rear tire size: , 4996542 Serial Number: 91593655 Prjdpfx Asxqu Ihshcoa Battery Details: 24 Volt

Condition: used, machine/vehicle number: 16333, Year of construction: 2020, operating hours: 8,032 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, front tire size: , rear tire size: , 4866783 Serial Number: 91653324 Prjdpfx Aew R A R Sshcja

Condition: used, machine/vehicle number: 16682, Year of construction: 2019, operating hours: 8,013 h, load capacity: 3,000 kg, fuel type: electric, mast type: other, 5014029 Pedpfx Aoxwgz Hshcjra Serial Number: 91638297

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,416 h, fuel type: electric, empty load weight: 630 kg, total length: 1,350 mm, drive type: Elektro, tractive force with load: 3,000 N, construction width: 600 mm, Tractor Technical condition: very good Battery Volt: 24V Battery Ah: 100Ah Battery manufacturer: Jungheinrich Predpfx Aezhydvshcea Battery type: Lithium-Ion Battery year of construction: 2019 Description: Inspection and UVV new Mini display, electric steering, ISM module, FloorSpot front, flashing light, work light front, Jet Pilot, Li-Ion battery