Reach truck

JUNGHEINRICH EKS 110

Condition: refurbished (used), Year of construction: 2020, operating hours: 3,448 h, load capacity: 660 kg, lifting height: 1,800 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,270 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 1,397 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Bwedpfxez Iklbs Amrou Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Order picker EKS 110 Z 100 E Drive type: Electric Load capacity: 660 kg Year of manufacture: 2020 Operating hours: 3,448 Lifting height: 1,800 mm Mast type: Duplex Overall height: 2,270 mm Fork length: 1,200 mm Unladen weight: 1,397 kg Load center: 600 mm Tires: Polyurethane Model type: EKS 110 Z 100 E Battery type: PzS Voltage: 24 V Battery weight: 478 kg

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre Bwjdpfx Amswvblasrju 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *

Condition: refurbished (used), Year of construction: 2020, operating hours: 2,558 h, load capacity: 660 kg, lifting height: 1,800 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,270 mm, battery voltage: 24 V, fork length: 1,000 mm, empty load weight: 1,397 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Bwodpfx Amoz Ikk Dsreu Material handling equipment data: Manufacturer: Jungheinrich Type: Order picker EKS 110 Z 100 E Drive type: Electric Load capacity: 660 kg Year of manufacture: 2020 Operating hours: 2,558 Lifting height: 1,800 mm Mast type: Duplex Overall height: 2,270 mm Fork length: 1,000 mm Unladen weight: 1,397 kg Load center: 600 mm Tires: Polyurethane Model type: EKS 110 Z 100 E Battery type: PzS Voltage: 24 V Battery weight: 476 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,948 h, load capacity: 1,000 kg, lifting height: 2,800 mm, fuel type: electric, drive type: Elektro, Medium-height order picker Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery year of manufacture: 2019 Bwjdezz D Huopfx Amrsu

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Bwedpfx Aszb U Epemrou Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: good (used), machine/vehicle number: 17236, Year of construction: 2019, operating hours: 1,511 h, load capacity: 1,000 kg, lifting height: 2,800 mm, load center: 700 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, battery voltage: 24 V, front tire size: , rear tire size: , overall weight: 2,305 kg, 5214298 Serial Number: 91634445 Bjdpfx Amezigp Ierswu Battery Details: 24V 4PzV 480Ah BJ: 2019

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,157 h, load capacity: 1,000 kg, lifting height: 2,800 mm, fuel type: electric, mast type: simplex, construction height: 2,250 mm, drive type: Elektro, Medium lift order picker Bwedjwklxaepfx Amrou Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Bjdpfjyhph Eox Amrewu Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, 🧰 Product Features • Manufacturer: Jungheinrich • Model: EKS 110 Z 280 ZZ • Option: 120 • Condition: Used, see photos • Color: yellow - anthracite • Year of manufacture: 2011 • Operating hours: 4855 h • Lifting height: up to 3600 mm • Rated load capacity: 1000 kg • Unladen weight: 2070 kg • Battery weight: 504 kg • Battery voltage: 24 V • Drive power: 2.8 kW • Load center distance: 600 mm 💰 Price € 1,890,- net, excl. VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Bwodpfxsyzr U Ne Amrsu Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a real all-round carefree package: 1. Fixed price purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Execution of auctions on behalf of customers. Our full service with our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), 1320 KLT stacking boxes 800 x 600 mm (other dimensions also available) 33 pallets a 40 pieces (including packing ) SSI shepherd shop boxes Price is valid for purchase of the offered number of pieces. If you wish other quantities, please contact us. Offer is directed to dealers, resellers, public and church institutions ! From private inquiries we ask to take distance ! 1320 stacking boxes KLT boxes from SSI Schäfer by additional reinforcements up to 40 kg loadable, ideal also for use as planters Article no. for the whole unit KLT8060_1320 Inquiry please with indication of a telephone number stacking boxes (1320 pieces) used and good optically good, no damage (new price seen for 35,-€ per crate) 3,- Euro net / box Ideal for storage rack, parcel trolley, picking trolley, transport container, transport trolley, storage rack, firewood trolley or can be used for yellow bags, elastic bands provide additional stability of the side rails, as these can be pressed outwards during filling. can be pressed outwards during filling. With the basic dimensions of 80cm x 60cm the boxes have the ideal the ideal size for eurostandard crates, e.g. bakery crates 60x40cm or meat crates 60x40cm or all other boxes with dimensions 600x400mm and also 800x600mm In other auctions we offer tension belts, tension rubbers, foil hoods, wheels and shelves, bakery crates and meat crates (E2 crates). We are happy to advise. also suitable rolling containers in stock / see photos: Dimensions rolling trolley: Base area 810 x 720 mm height ca 1530 mm loadable up to 500 kg Dimensions stacking boxes: 80 x 60 cm height 11,5 cm (all dimensions are approximate) Viewing possible after telephone arrangement Trolley can be disassembled and fits in (almost) any car Bedpfx Asl Tiqyomrewu (photo similar) other items in stock, if interested please contact us.