Forklift

Jungheinrich EFG425K Electric, Lifting Height 7500mm, Freelift

Condition: good (used), Qty 2 Linx Ink Jet Coders Models 7900 & 7300 In good working condition Fully serviced In working condition Kledpokyumkofx Afgst

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Ksdpfoxm Sxvsx Afgjlt Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Ksdpfxewh Sigs Afgjlt Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: good (used), Year of construction: 2020, Koenig and Bauer Alphajet Into Inkjet printer Kedpfxeuc U Udj Afgolt Serial: MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1000 mm Kledpfxex D Eh Ej Afget X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2018, machine/vehicle number: DF0199 - Rev.00, pressing force: 160 t, pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Kedpfxodxvfho Afgjlt Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

Year of construction: 2020, condition: ready for operation (used), X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible. Klsdpfx Afsw Sxx Uegjt

Condition: used, Year of construction: 1982, grinding diameter 630 mm grinding length 600 mm centre height 320 mm Maschine wird überholt nach Kellenberger Messprotokoll und neu lackiert. Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerung ersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neue Elektrik. Siehe Beispielfotos. Maschine mit verstärktem Werkstückspindelstock zum fliegend Schleifen von schweren Werkstücken. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Kodpsvq R Uzsfx Afgslt Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, machine/vehicle number: 15355, Year of construction: 2008, operating hours: 15,561 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 15355 Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lifting height: 5,500 mm Read operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full cabin * Heating * Front work lights * Rear work lights ---- Further device information: Without fork carrier Rotating beacon Radio Single pedal ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! Klodpfetw Dfwox Afget We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information provided without guarantee, errors and changes reserved.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Kljdoq N Ap Sspfx Afgst Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training - Clamping devices - Dielectric - Cooling unit