All-terrain forklift

Jumbo J60 DC12

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Iodpfx Aoxlkq Ujh Noht Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Ihodpfxjw N Iz Hs Ah Net Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm Ihedpfx Aehcwrkoh Net spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: used, mileage: 167,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area * Mobile office package 1 Isdpfxjww Sgds Ah Nsht * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Errors and omissions excepted.

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports spindle motor 5,5 kW hydraulic motor 2,2 kW Isdpep Dt Twefx Ah Njht

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Ijdpfx Ahenq Di To Njht Gz7iapb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW Ijdpfx Ahsk Tyrwe Neht 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Iodpfx Asx H Uhieh Njht Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Machine height: 1250 mm Working height: 900 mm Weight: 988 kg Price subject to change. Errors and misprints excepted.

Condition: refurbished (used), overall weight: 3,200 kg, Brand "Kleemann", type SSTR 400 Ihjdpfx Ajq Ttmfjh Net Opening width: 400 x 250 mm Performance: 4 - 10 cbm/h Gap width: 20 - 70 mm Weight: approx. 3,200 kg Power requirement: 15 kW Workshop overhauled

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm Ijdpfeghgq Njx Ah Njht 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan