Telescopic work platform

JLG X20J+

Condition: ready for operation (used), functionality: fully functional, load capacity: 350 kg, platform length: 3,180 mm, platform width: 1,160 mm, overall weight: 3,221 kg, working height: 13,700 mm, TECHNICAL DETAILS Working height: 13.70 m Platform height: 11.70 m Guardrail height: 1.10 m Toe board height: 0.15 m Platform height, retracted: 1.43 m Platform length, outside: 2.26 m Platform length, extended: 3.18 m Platform extension: 0.91 m Platform width, outside: 1.16 m Dkedpfx Aeyzq Rpsdajk Height, retracted, foldable guardrail: 2.54 m Height, retracted, guardrail folded down: 1.95 m Length, retracted: 2.48 m Length, with platform extension deployed: 3.18 m Width: 1.19 m Wheelbase: 1.85 m Ground clearance, centre: 0.10 m Ground clearance, with pothole protection deployed: 19 mm Load capacity: 350 kg Platform extension capacity: 113 kg Drive speed, stowed: 3.2 km/h Drive speed, extended: 0.8 km/h Gradeability, stowed: 25 % Turning radius, inside: 0 m Turning radius, outside: 2.3 m Lift/lower time: 71/41 s Drive system: Two-wheel front-wheel drive Tyre dimensions: 38 × 13 × 28 cm / 15 × 5 × 11 in Control: proportional Brakes: Two-wheel rear axle, hydraulic-dynamic braking of the front drive wheels, multi-disc brakes MACHINE DETAILS Drive type: 24 V, 300 Ah Batteries: 4 × 12 V, 150 Ah Hydraulic system tank capacity: 28.4 l Noise/sound pressure level at ground: < 70 dBA Noise/sound pressure level at platform: < 70 dBA Vibration: < 2.5 m/s² CE own weight: 3,221 kg FEATURES Foldable guardrail with platform Full guardrail swing door Smart Link™ control system Recessed rear socket for charger Platform control panel with battery charge indicator Fully integrated diagnostics system Power cable to platform Attachment points for safety harnesses Emergency lowering valve for manual platform descent Emergency stop switches at platform and ground control panels Multi-disc brakes on rear axle Hydraulic-dynamic braking on front drive wheels Manual brake release device Side swing-out battery box and hydraulic components box Pothole protection Tilt angle sensor with acoustic alarm Descent alarm Flashing warning light Electronic horn Hour meter Telematics-ready connection

Condition: ready for operation (used), functionality: fully functional, load capacity: 227 kg, overall weight: 5,178 kg, pivoting range: 355 °, working height: 12,520 mm, TECHNICAL DETAILS Working height: 12.52 m Platform height: 10.52 m Horizontal outreach: 6.78 m Up-and-over height: 4.65 m Dimensions Platform length: 0.76 m Platform width: 1.42 m Stowed height: 2.00 m Stowed length: 5.72 m Transport height: 2.26 m Transport length: 4.19 m Width: 1.47 m Wheelbase: 1.88 m Ground clearance (center): 0.14 m Performance Lift capacity: 227 kg Platform rotation: 180° Jib length: 1.22 m Vertical jib rotation: 139° Turntable rotation: 355° Drive speed (stowed): 6.4 km/h Drive speed (raised, extended): 1.1 km/h Gradeability (stowed): 35% Tilt sensor activation (longitudinal/lateral): 2.5° - 4.5° / 4.5° Turning radius (inside/outside): 2.13 m / 4.08 m Tyres (solid, non-marking): 56 × 18 × 45 cm Drive/Power Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Noise and Vibration Levels Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s² MACHINE DETAILS Own weight: 5,178 kg Wheel contact pressure: 710 kPa Floor loading (wheels): 14.75 kPa Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Dkjdpfx Aoyzq A Eedaok

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, power: 3 kW (4.08 HP), overall weight: 2,600 kg, maximum load weight: 200 kg, pivoting range: 345 °, working height: 10,100 mm, TECHNICAL DETAILS Working height: 10.10 m Lateral outreach (standard platform): 3.38 m Up-and-over height: 6.51 m Slew range: 345° Platform capacity: 200 kg Articulating jib length: 1.60 m Articulating jib movement range: 126° (+69°/-61°) Platform size (L × W): 0.70 × 0.90 m Platform width: 0.99 m Max. permissible ground pressure: 19.7 kg/cm² Drive speed, stowed: 5.5 km/h External turning radius: 1.99 m Internal turning radius: 0.55 m Climbing ability: 25% Ground clearance: 0.10 m MACHINE DETAILS Tire size (non-marking): 406 × 125 mm Operating voltage: 24 V DC Batteries (AGM): 24 V – 260 Ah Charger: 24 V – 27 A Dkodoyzq Axepfx Adaek Drive motors: 2 AC motors Electric motor (pump): 3 kW, 24 V DC Hydraulic oil volume: 7.5 l Dimensions & Weight Transport length: 2.82 m Transport width: 1.20 m Transport height: 1.99 m Machine weight (standard platform): 2,600 kg EQUIPMENT Steel platform Sliding bar at rear access Proportional drive and slew control via joystick with integrated thumb steer switch Mini joysticks for proportional boom and articulated jib lift functions Load monitoring system Mains power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge automatic cut-off On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Passive pothole protection system Tie-down and lifting eyes Ground controls selector switch with key lock Battery discharge indicator Operating hours counter Horn Drive orientation system Anchor points for safety harnesses Xenon strobe beacon Manual lowering system

Condition: ready for operation (used), functionality: fully functional, load capacity: 200 kg, platform length: 700 mm, platform width: 1,050 mm, overall weight: 4,900 kg, working height: 12,650 mm, TECHNICAL DETAILS Working height: 12.65 m Lateral outreach (standard platform): 6.05 m Up-and-over height: 7.12 m Slew range: 345° Platform capacity: 200 kg Articulated jib length: 4.14 m Jib movement range: 120° (+60° / -60°) Platform size (L × W, standard platform): 0.70 × 1.05 m Platform width: 1.20 m Tail swing: 13 cm Transport height: 1.99 m Transport length (standard platform): 3.65 m Wheelbase: 1.60 m Ground clearance: 10 cm Max. permissible ground pressure: 14.0 kg/cm² Travel speed, stowed: 6.0 km/h Outside turning radius: 2.60 m Inside turning radius: 0.75 m Gradeability: 30% MACHINE DETAILS Machine weight (standard platform): 4,900 kg Tyre size (non-marking): 457 × 178 mm Operating voltage: 48 V DC Batteries (Deep Cycle): 48 V – 260 Ah Charger: On-board 110 V / 230 V HF Drive motors: 2 AC motors Electric motor (hydraulic pump): 3.5 kW – 48 V DC Djdpfx Ajyzrg Sodaekk Hydraulic oil capacity: 15 l EQUIPMENT Steel platform Sliding bar at rear entrance Proportional drive and slew control via joystick with integrated thumb steering switch Mini joysticks for proportional boom, telescope, and jib operation Large platform console with function enable Load sensing system AC power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge cut-off function On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Lashing and lifting lugs Ground control selector switch with key lock Battery discharge indicator Hour meter Horn Direction orientation system Anchor points for safety harnesses Manual descent system Passive pothole protection system

Condition: ready for operation (used), functionality: fully functional, load capacity: 227 kg, platform length: 1,520 mm, platform width: 760 mm, overall weight: 6,532 kg, pivoting range: 360 °, TECHNICAL DETAILS Platform height: 13.72 m Horizontal outreach: 7.24 m Up-and-over clearance: 7.70 m Slewing range: 360° continuous rotation Platform capacity: 227 kg Platform rotation: 180° Vertical jib articulation range: 144° (+86° / -55°) MACHINE DETAILS Machine weight: 6,532 kg Max. ground pressure: 7.6 kg/cm² Driving speed: max. 7.2 km/h Gradeability: 30% Turning radius (inside, 2WS/4WS): 0.61 m Turning radius (outside, 2WS/4WS): 3.15 m Electrical system: 48 V DC Batteries: 8 × 6 V, 375 Ah AC power outlet on platform: 110 V Additional power supply: 12 V Standard tires: 24 × 9 × 12.5 Optional tires: 26 × 7 × 20, non-marking Hydraulic tank capacity: 15.14 l Platform width: 76 cm Platform length: 1.52 m Machine width: 1.75 m Machine height: 2.01 m Machine length: 6.45 m Wheelbase: 2.01 m Ground clearance: 20 cm EQUIPMENT Dual electric traction motors Foam-filled, non-marking tires Electric turntable All-wheel drive Automatic traction control Battery charge indicator Brushless AC motors ClearSky Smart Fleet Horn Hour meter LED lighting with amber beacon Dedpfx Adjyzq Uusaekk Lifting and tie-down lugs Load sensing system Platform leveling system Platform status indicator light SkyGuard SkyLine Tilt alarm and warning light

Condition: ready for operation (used), functionality: fully functional, load capacity: 227 kg, platform length: 2,790 mm, platform width: 780 mm, overall weight: 1,279 kg, working height: 7,640 mm, TECHNICAL DETAILS Working height, indoor: max. 7.64 m Working height, outdoor: max. 6.27 m Platform height, indoor: max. 5.64 m Platform height, outdoor: max. 4.27 m Platform length, retracted: 0.89 m Platform length, outdoor: 1.88 m Platform length, outdoor, extended: 2.79 m Platform extension, length: 0.91 m Platform width, outdoor: 0.78 m Guardrail height: 1.10 m Toe board height: 15 cm Height, retracted, folding guardrail: 2.00 m Height, retracted, guardrail folded down: 1.50 m Length, retracted, with integrated or optional ladder: 1.88 m Length, retracted, with platform extension extended: 2.79 m Width: 0.81 m Wheelbase: 1.55 m Ground clearance, center, with retracted pothole protection: 10 cm Ground clearance, center, with extended pothole protection: 2 cm Maximum number of persons on platform (indoor/outdoor): 2 / 1 Load capacity: 227 kg Load capacity, with platform extension extended: 113 kg Drivable up to: max. platform height 5.64 m Travel speed, retracted: 4.0 km/h Travel speed, extended: 0.8 km/h Dodpfxeyzrlue Adaekk Gradeability, retracted: 25% Turning radius, inside/outside: 0 / 1.80 m Lifting/lowering time: 33 / 30 s Tilt sensor activation (longitudinal/lateral axis): 3° / 1.5° Non-marking solid rubber tires: 31 × 11 cm MACHINE DETAILS Drive type, FLA: 24 V DC (2 × 12 V, 150 Ah) Drive type, AGM: 24 V DC (2 × 12 V, 132 Ah or 150 Ah) Drive type, lithium-ion: 24 V DC (1 × 24 V, 90 Ah or 106 Ah) Hydraulic system tank capacity: 6.1 l Own weight: 1,279 kg Maximum own weight, including all possible options: 1,397 kg Maximum tire load: 642 kg Tire contact pressure: 1,084 kPa Floor loading: 10.42 kPa Noise/sound pressure level (ground): < 70 dBA Noise/sound pressure level (platform): < 70 dBA Vibration: < 2.5 m/s²

Condition: excellent (used), functionality: fully functional, For sale is a tracked aerial work platform JLG X20J+ in excellent condition. The machine was built in 2024 and has only 67 operating hours, making it virtually as new. Thanks to its compact tracked chassis, the lift is ideal for work on sensitive or uneven ground, as well as for narrow passages and hard-to-access job sites. Technical specifications: Manufacturer: JLG Model: X20J+ Year: 2024 Operating hours: 67 h Working height: 20.05 m Outreach: approx. 9.7 m Platform capacity: 230 kg Platform size: 0.69 x 1.34 m Machine weight: approx. 2,840 kg Transport width: just approx. 0.80 m Transport length: approx. 5 m Drive: Diesel / Electric Features / Advantages: - Tracked undercarriage for difficult terrain - Automatic outriggers for quick setup - 360° rotation Platform for 2 persons Compact design – fits through narrow openings Ideal for facade work, roofing, PV installations, tree care, or hall assembly Condition The machine is in flawless technical condition and has been regularly inspected and serviced. Applications - Photovoltaic installation Dkedpfeyqxugex Adajk - Roofing and facade work - Tree care - Building maintenance - Assembly work indoors and outdoors Inspection possible by appointment. Transport can be arranged if required.