JCB 457ZX

JCB 457ZX

Condition: used, power: 207 kW (281.44 HP), fuel tank capacity: 300 l, color: orange, lifting height: 1,310 mm, Year of manufacture: 2021 Year of construction: 2021 Bwedpfx Asx Trk Ueknsw Operating hours: 5.370 Engine capacity: 6.700 cc Empty weight: 19.950 kg Carrying capacity: 7.717 kg GVW: 27.667 kg Dimensions (LxBxH): 796 x 274 x 343 cm Engine type: Cummins Cummins 6,7 l. Stage V 282 CV

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm Bwsdpfoi Ai E Rex Aknsw -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)

Condition: used, fuel tank capacity: 300 l, lifting height: 1,310 mm, Year of manufacture: 2020 Year of construction: 2020 Operating hours: 6.100 Empty weight: 20.094 kg Carrying capacity: 7.717 kg GVW: 27.811 kg Dimensions (LxBxH): 796 x 274 x 343 cm Bsdpfexpvi Djx Aknsww Engine type: Cummins Cummins 6,7 l. Stage V 282 CV Bucket volume: 3.5 m^3

Condition: used, fuel tank capacity: 300 l, lifting height: 1,310 mm, Year of manufacture: 2021 Year of construction: 2021 Operating hours: 6.150 Empty weight: 19.950 kg Carrying capacity: 7.717 kg GVW: 27.667 kg Dimensions (LxBxH): 796 x 274 x 343 cm Bwjdpfx Ajxq Ru Dsknew

Condition: used, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: diesel, overall weight: 18,200 kg, Year of construction: 2000, operating hours: 12,370 h, JCB 456B Wheel Loader Year of manufacture: 2000 12,370 operating hours Total weight: 18,200 kg 147 kW 1x bucket GOOD CONDITION Export net price: €18,500.00 All information provided without guarantee / subject to errors and omissions. Bwedpfxswk Evfs Aknjw

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Bwedpfxenkapye Aknow Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Max hoist height: 12,4 meters. Bjdpfohk I H Dsx Aknoww Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Transport can be arranged. Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.

Condition: used, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 6,900 mm, fork length: 1,200 mm, total length: 5,920 mm, - Max. Tragkraft 3000 kg - Max. Hubhöhe 6.90 m - Maximale seitliche Reichweite 4 m - Kippwinkel 11 ° - Schüttwinkel 116 ° Bedexd E N Aspfx Aknoww - Wenderadius (über Räder) 3.33 m - Getriebetyp Hydrostatisch - Standard Bereifung ALLIANCE 380/75 R20 148A8 A580 - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Lenkräder (vorne / hinten) 4 / 4 - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Heben 9.42 s - Senken 7.53 s - Teleskop ausfahren 7.43 s - Teleskop Einfahren 9.36 s - Ankippen 3.21 s - Auskippen 2.15 s - Motornorm Stage V - Motor Modell V3307-CR-TE5B - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm - Nennleistung Verbrennungsmotor - Leistung (kW) 55.92 kW / 54.60 kW - Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm - Zugkraft 3860 daN - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Pumpenart Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 88 l/min / 245 bar - Motoröl 11 l - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 90 l - Geräuschpegel im Fahrerstand (LpA) 74 dB - Umgebungsgeräusch (LwA) 103 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 4 / 4

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination Bedpfxjyqn Hrj Akneww * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Bwedpfx Aozmnzaoknew Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Engine type - 16V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz =Other information= Production country - Germany