Loader

JCB 409 SV / nur 758h! / Klappschaufel / Gabel

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Rated power: 80 HP Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission Djdpfx Ajyv S Uljkvjkr PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Location: not specified

Condition: new, fuel type: electric, Year of construction: 2025, Empty weight: 2.300 kg Top speed: 14 km/h Dkedpfxjyaqgge Akver

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm Dedpfx Akjzmpryovskr * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED * 4 work lights on the front roof of the cab Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, Year of construction: 2010, operating hours: 8,000 h, Orderly machine Liebherr L 514 Z Stereo Stereo Loader (articulated steering + rear axle steering – extremely manoeuvrable!!!) Year of manufacture: 2010 Original operating hours: 8000 Chassis number: VATZ 1115CZB025518 Tyres 17.5 x 25 at 40% (with nails + screws – but still airtight!) Power: 72 kW (98 HP) Total weight: 10,500 kg Air conditioning 3rd hydraulic control circuit for auxiliary equipment such as high-tip bucket, bucket with clamp, silage block cutter, etc. 2 work lights on the cab roof, front Battery isolator switch, comfort driver's seat with suspension Warning beacon at rear of cab (top) Road registration Hydrostatic travel drive with 2 speeds Width: 2400 mm Net price including hydraulic quick coupler and 1.6 cubic metre bucket: €36,500 Additional equipment available at extra cost: 5-ton pallet fork from €2,190 High-tip bucket from €3,250 Dsdjy R Ib Dopfx Akvokr Volume bucket All prices are net ex stock plus 19% VAT or for export! We are happy to offer transport to your location. Sale exclusively to commercial customers or for export. Sold as seen, in its current condition. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent warranted characteristics. The description and the details provided serve only for general identification of the vehicle and do not constitute a guarantee as defined by sales law. The information does not claim to be complete. The specifications/descriptions and photos are non-binding and do not constitute warranted characteristics. Only the arrangements in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typographical or data transfer errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to take your vehicle in part exchange. For further questions, please feel free to contact us. For our international customers, we handle all customs and export documents for smooth overseas delivery.

Condition: used, color: yellow, Year of construction: 1999, Ahlmann AZ 85 wheel loader    • 10,188 operating hours    • Engine overhauled    • Wide tyres    • Swing boom Dkedpfx Akjy Na H Nsver    • Bucket and pallet forks    • Registration plate    • Direct from work Condition: Used Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2021, A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentation available. An on-site inspection is possible. Dodpszhw Skjfx Akvokr

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Dsdpfxefzq Ste Akvokr Prices are given in the catalog

Condition: used, Year of construction: 2005, operating hours: 5,316 h, Equipment: all wheel drive, Equipment: * 5,316 operating hours * Engine power: 53.5 kW * 20 km/h * Hydraulic connections * Additional headlights * Rotating beacon * Quick coupler Other: * 1 previous owner * Originally delivered in Germany * Year of manufacture: 2005 * Service weight: 5,975 kg * Total weight: 6,500 kg * Brakes have an error message Since 1972, we have been your reliable partner for all things related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. Dkjdpjx Rfbzefx Akvsr If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale excepted.

Condition: used, Year of construction: 2017, operating hours: 5,013 h, Equipment: all wheel drive, * L506C * Bucket Dkjdpfx Aox I Uwyokvsr * Pallet fork * All-wheel drive * Quick coupler * Year of manufacture: 2017 * Operating hours: 5013 hrs * Unladen weight: 5180 kg * 20 km/h, USB/radio * Yanmar engine ----Internal vehicle number: 11648-----Subject to errors and prior sale ----WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to contact us easily via WhatsApp. Whatsapp Whatsapp

Condition: excellent (used), functionality: fully functional, power: 68.7 kW (93.41 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 166 l, color: blue, overall weight: 4,768 kg, maximum load weight: 1,611 kg, lifting power: 1,611 kg/m, lifting height: 3,353 mm, tire size: Rubber rupsbanden 450 mm, tire condition: 85 %, number of seats: 1, shovel volume: 0.55 m³, Year of construction: 2020, operating hours: 2,032 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, head guard, onboard computer, pallet forks, parking heater, soot filter, standard shovel, traction control, === KEY SPECIFICATIONS === Year: 2020 Operating hours: 2,032 h Operating weight: 4,768 kg Rated operating capacity: 1,611 kg Tipping load: 4,602 kg Drive type: Hydrostatic Undercarriage: Rubber tracks Cab: Closed cabin Heating: Yes Air conditioning: Yes Quick coupler: Yes (Bob-Tach) Hydraulic functions: Auxiliary hydraulics High Flow auxiliary hydraulics: Yes Engine manufacturer: Kubota V3800-DI-T-E3 Engine power: 68.7 kW Emission class: Stage IIIA CE certified: Yes === HIGHLIGHTS === Carefully selected machine with verifiable history CE certified and fully documented Ready for immediate use Equipped with reliable Kubota engine High Flow hydraulics – suitable for heavy-duty attachments Compatible with a wide range of attachments (Bob-Tach system) Compact, powerful, and versatile track loader === CONDITION === Good working condition – fully operational Normal signs of use consistent with age and hours Tracks in used condition with visible wear Machine is ready for immediate deployment Inspection possible on request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price €46,500 (EXW / excl. VAT) Reliable Bobcat T770 compact track loader, designed for demanding construction and earthmoving applications. This machine combines strong lifting performance, excellent stability, and high versatility thanks to the Bob-Tach system and High Flow hydraulics, allowing the use of high-demand attachments such as mulchers, sweepers, augers, and more. All machines are thoroughly inspected, CE-certified, and ready for immediate operation. Spare parts and professional support available on request. === DELIVERY === Crane loading available on request for smooth transport Dkedpfx Asyy Iuiokvsr Flexible shipping solutions tailored to your destination Handled by Collé Rental & Sales logistics team