Roller chain 3/4x7/16"

Iwis mit Mitnehmer

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Fedpfoyx Uy Ajx Akyjpn Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Fodpfsh Eii Tsx Akyspn Technical data and description: see pictures

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Format: 480 x 650 mm Fpsdpfx Aevfxqgskysn Equipment: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 626963, Heidelberg - SM 74-2 H Number of copies produced 74.077.397 Year of Production -2003 Max-Sheet Size 530 × 740 mm (20.87 × 29.13 in) -- 2/0—1/1 Max.printing Speed 13000 /h Fpedpjz Nz S Aefx Akyjn CP 2000 Center, AutoPlate system, Dampening rollers Alcolor Automatic Wash rollers and Cylinder Ink Fountain-Ink zone motor Electric equipment- 50Hz 380 V Pull Lay control-Electronic Powder spray-Alphathronic 200 Circulation and cooling ---Dampening Baldwin Device Available immediately

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Fpsdsyuztgopfx Akysn Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, Year of construction: 1995, Folding machine MBO K76 -4 P KZ Year: 1995 Description: - 16 page folder Feeder - Pallet feeder: FP - 76 - Counter - Pump Folding unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold Fpedpfxsilc Sbe Akysn - Second cross fold to the left and right - Excluding delivery Power supply : 400 V, 3 phases

Condition: used, Dataweigh ADW-410SV – Precision Multihead Weigher for Efficient Packaging Lines The Dataweigh ADW-410SV is a high-performance multihead weighing system engineered for fast, accurate and reliable weighing of products in food, snack, confectionery, pet food and industrial applications. Built for continuous production environments, this machine combines robust design with easy operation to optimize throughput and minimize waste. Key Features & Benefits - High throughput: Designed with 10 weighing heads for efficient combination weighing and rapid fill cycles — ideal for mid-range production speeds. - Consistent accuracy: Achieve reliable portion control and minimized giveaway on each batch. Scribd - Hygienic construction: Built to meet hygiene standards required in food processing environments. Yamato Scale - Operator friendly: Intuitive controls make setup and changeovers fast and straightforward. Yamato Scale - Reduced downtime: Durable components and easy access improve uptime and cleaning efficiency. Yamato Scale Technical Specifications (Typical) (Specifications may vary by configuration and options.) Fpsdpfx Aox Srpuekyjn - Model: ADW-410SV Multihead Weigher - Weighing Heads: 10 - Bucket Volume: Approximately 2 liters per head - Construction: Stainless steel frame — suitable for hygienic food environments Yamato Scale - Control Interface: User-friendly operator panel (exact interface may vary by model) Yamato Scale - Suitability: Inline integration with packaging and checkweigher systems Yamato Scale ----- Why Choose the Dataweigh ADW-410SV? - Boost production efficiency with multihead precision weighing - Reduce product giveaway and increase yield - Designed for hygienic, food-grade environments - Easy to operate and maintain * Model: ADW-410SV Multihead Weigher * Weighing Heads: 10

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Fjdpsw Rktzsfx Akyjpn Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Ultra-high productivity cutting line comprising: * POLAR 137 X Paper Cutter, year 2005 Usable working width: 137 cm. 2 HSS blades, stainless steel air table 80x100 cm with lateral air tables, connected to the Jogger and Discharge System * POLAR RA 4 Jogger, year 2005 with air-removal roller and safety barriers * Automatic discharge system (palletizer) model Polar TR130ER-4 RIGHT, year 2005 * Pile Lifter Polar LW 1000/4, year 2005 Line installed and ready for any test. Fpsdpfxsyzxlhs Akyon Technical and aesthetic condition like new. Ready for immediate delivery.

Condition: used, functionality: fully functional, COMPLETE POLAR 137 ED AUTOTRIM CUTTING LINE CONSISTING OF: POLAR 137 ED AT GUILLOTINE with Autotrim device for automatic waste trim removal, useful cutting width 137 cm, complete with side connecting stainless steel air tables, press before the blade, swiveling and tiltable saddle Fedpfxjy R R Rhs Akyepn POLAR RA 6 JOGGER with air removal roller, Year 2000 POLAR TR 130/4 AUTOMATIC DELIVERY Possibility to configure the delivery and jogger on the right or left The line is installed and available for testing at our showroom