Roll-off tipper truck

Iveco Stralis AT260 CNG Erdgas 6x2 Meiller RS2165 FB

Condition: used, mileage: 193,488 km, power: 294 kW (399.73 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 11,830 kg, maximum load weight: 14,170 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Only 193,488 km original mileage * Condition as shown in photos * Iveco Stralis AT 260, 100% natural gas (CNG) * Meiller roll-off tipper, type RS-21-65, with remote control * 21,000 kg payload * 200 bar operating pressure * Suitable for all container types * Pneumatically extendable underride guard * Pneumatic container locking * Trailer coupling with electrical and hydraulic connections * Towing capacity: 24,000 kg * Gross combination weight: 40,000 kg Lajdpfx Aezz R Ixjbzog * Driver's cab with one bed and two seats * Air conditioning * Rear-lifting, steered lift axle (raise/lower) * Adaptive cruise control (ACC) * Refrigerator * Lane departure warning system * Hill start assist * Automatic transmission * Air-suspended comfort seat * Heated seat * Multifunction steering wheel * Roof hatch * Cruise control * Electric windows * Electrically heated mirrors * Reversing camera * Reinforced engine brake * Bluetooth phone function * Differential lock * CB radio * Work lights * Wheelbase: 5,100 mm + 1,400 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 11,830 kg * Payload: 14,170 kg If a new TÜV inspection is desired, we would be happy to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, nor new DGUV, nor new SP, nor new UVV certifications. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspecting the item in order to avoid misunderstandings regarding its condition and suitability. Inspections and viewings are possible anytime by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the item/vehicle. Changes, prior sale, and errors excepted. -

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis Lajdpfx Abju Ng Dtezog - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, mileage: 193,488 km, power: 294 kW (399.73 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 11,830 kg, maximum load weight: 14,170 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Only 193,488 km original mileage * Condition as shown in photos * Iveco Stralis AT 260, 100% natural gas (CNG) * Meiller roll-off tipper, type RS-21-65, with remote control * 21,000 kg payload * 200 bar operating pressure * Suitable for all container types * Pneumatically extendable underride guard * Pneumatic container locking * Trailer coupling with electrical and hydraulic connections * Towing capacity: 24,000 kg * Gross combination weight: 40,000 kg * Driver's cab with one bed and two seats * Air conditioning * Rear-lifting, steered lift axle (raise/lower) * Adaptive cruise control (ACC) * Refrigerator * Lane departure warning system * Hill start assist * Automatic transmission * Air-suspended comfort seat * Heated seat * Multifunction steering wheel * Roof hatch * Cruise control * Electric windows * Electrically heated mirrors * Reversing camera * Reinforced engine brake * Bluetooth phone function * Differential lock * CB radio Ledpfxszd Szre Abzjag * Work lights * Wheelbase: 5,100 mm + 1,400 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 11,830 kg * Payload: 14,170 kg If a new TÜV inspection is desired, we would be happy to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, nor new DGUV, nor new SP, nor new UVV certifications. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspecting the item in order to avoid misunderstandings regarding its condition and suitability. Inspections and viewings are possible anytime by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the item/vehicle. Changes, prior sale, and errors excepted. -

Condition: used, Parts cleaning system from renowned Austrian company Laodpfovcrutox Abzeg Machine comes from company liquidation, was in operation until the end. Cleaning agents are included.

Condition: new, functionality: fully functional, Year of construction: 2026, LOADING, UNLOADING, LOADING DOCK, ACCESS, MOBILE RAMP 15T RAMP, 2M WIDTH TM-GROUP ONE OF THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2150 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Raid Lattice: - Galvanized grid with anti-slip grooves. Reliable and safe base. The forklift and pedestrian traffic are guaranteed the best possible grip and solid support. ✅ Handle for a forklift (can be installed on both sides): - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. Lajdpsmt D Sbsfx Abzog - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: excellent (used), mileage: 277,001 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,460 mm, total width: 2,500 mm, total height: 1,280 mm, Year of construction: 2018, Equipment: AdBlue, Bluetooth, air conditioning, airbag, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, power mirror, second fuel tank, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Disc brakes - Enhanced engine brake - Gullet - Hub Reduction - Hydraulics - Lift Axle - limited slip differential - Low noise - Power take-off (PTO) - PTO - Radio - Radio/Cassette player - Rotator - Speed limiter - Toolbox = Remarks = Crane Tap Length: 32 m Hours: 3642 uur Number of hydraulic extensions: 12 Number of support legs: 4 Remote control: ✓ Rotator: ✓ Meter capacity: 32 m Capacity kilo: 11300 kg = More information = General information Number of doors: 2 Cab: single Registration number: 1TUS306 Technical information Number of cylinders: 6 Axle configuration Front axle 1: Steering Ledpfx Asy Iqa Rjbzsag Rear axle 1: Double wheels; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Double wheels; Steering; Reduction: hub reduction Weights Empty weight: 24.060 kg Carrying capacity: 7.940 kg GVW: 32.000 kg Max. towing weight: 44.000 kg Functional Crane: HIAB 638 E6, year of manufacture 2017, on rear of chassis Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. Lasdpfx Ajh Hd A Ssbzeg The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding Laedpfx Ajg Du Aqebzsg With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Ljdpfxjvcbw Ds Abzeag Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, mileage: 645,465 km, power: 332 kW (451.39 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 7,610 kg, maximum load weight: 10,390 kg, overall weight: 18,000 kg, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, Grr. Haus, 1x comfort seat, 2x recliner, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, electric roof, auxiliary heating, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, front exhaust, roof spoiler, side spoiler, differential lock, fog lights, leaf air suspension, aluminum tank, low noise G1 Wheelbase: 3800 mm ONLY FOR SPARE PARTS! ONLY FOR SPARE PARTS! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Laedpfx Aovhhtcsbzeg