Conveyor belt Italpresse

Italpresse

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders Hsdpjyxwzcofx Ab Iok cylinder diameter 85 mm integrated oil heating power supply 380V

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Hodpfsyxp Twex Ab Iek Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: ready for operation (used), A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible. Hodpfxeyxgrde Ab Iok

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic strip feed aggregate angle adjustment pneumatic spindle movement strip supports oscillating drill movement adjustment Hsdjyxczbopfx Ab Iok feed stroke adjustment 380V power supply

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Hjdpfeyuyl Ijx Ab Isk Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Hodpfx Ajyuxh Isb Isk Gluing machine Destacker High-frequency cabinet (offered separately)

Condition: used, Technical specifications: Hjdpfxsyv Atre Ab Iek Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm

Condition: good (used), Code: 0319 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Hsdpfjyrgh Rox Ab Iek Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

Condition: ready for operation (used), working length 3300 mm working height 1800 mm 3 vertical cylinders Hsdpfeypcxtex Ab Iek 2 horizontal cylinders manual operating mode

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Hedpfshwwnrsx Ab Ijk Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction