Tipper van

Isuzu M30 - GRU PALFINGER PK5001 + RIBALTABILE

Condition: used, Year of construction: 2021, operating hours: 2,783 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tyres (front): 215/75 R16, Tyres (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300 mm, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled Standard Equipment Fully Electric CityCat V20e: Cabin: Comfortable suspended, sound-insulated aluminium cabin. Front windscreen made of heat-insulating, curved, anti-reflective safety glass. Two sliding windows on each door. Multi-level heating fan, sun visors, windscreen wiper with washer system. Individually adjustable, suspended driver's seat with headrest and 3-point seatbelt. Steering column adjustable for angle and height. Chassis: Two-part ladder frame chassis with "C"-profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions as well as broom drive at the front and sides. Brakes: Hydraulic servo dual-circuit braking system with disc brakes on front and rear axle. Parking brake (spring-loaded brake) acting on the front axle. Drive: Working speed 0-15 km/h, Driving speed 0-50 km/h*, climbing ability up to 30%. Electric drive output 88 kW. Electric blower 8.5 kW. Electro-hydraulic unit 12 kW. HV Battery: Battery type Li-ion, battery capacity 63 kWh, nominal voltage 335 Volt, operating time up to 10 hours. Charging system: Integrated charger 22 kW, charging plug Type 2, charging time 2 to 3 hours. Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulics: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, and broom drive at the front and sides. Electrical system voltage: 12 V electrics, battery 95 Ah. Hydraulic servo dual-circuit braking system with disc brakes on front and rear axle, spring-loaded brake (parking brake) and handbrake valve acting on front axle. Tyres: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm, Width 1300 mm, Height 1999 mm, Wheelbase 1900 mm, Track width 1090 mm, Sweeping width 2100 mm, Sweeping width with 3rd broom 2700 mm Optional equipment: - Lithium-ion NMC battery, 63 kWh, 335 V - RAL 9016 white - Suction hose, 4 m long (incl. suction tube), diameter 120 mm, with Storz couplings, with hydraulic shutoff flap - Third front disc broom - Broom diameter 800 mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment for both side brushes - Lateral adjustment of both side brushes, stepless hydraulic adjustment of each broom individually - Easy Clean quick cleaning system for cleaning the KGB sidewalls, recuperation and leaf grate - Hydraulic side brush pressure regulation for both side brushes with individual broom lifting, combined - DAB+ radio with CD MP3, Bluetooth, microphone Itsdpfx Agsiwwgho Iog - Heated exterior mirrors - Broom system...

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° Iedpfx Aexf Naheg Istg - Machine base - Swiveling machine lamp

Condition: good (used), functionality: fully functional, overall weight: 70 kg, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello The offer concerns rental of a gitterbox type container for a period of one day one piece 1 eur/brut/unit/day For a larger quantity for a longer period of time price to be determined. Technical parameters of the container - dimension 1240 x 835 x970 mm - load capacity 1500 kg - color RAL 7030 - weight of container 70 kg Itodpfx Agsula A He Ieg We offer other types of containers.

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter Itedpfx Ageuph Uxj Ieg - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, 10000 kg length 6000 mm width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: Iedpfx Aget Dqv Uo Istg - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: used, mileage: 24,665 km, power: 103 kW (140.04 HP), first registration: 04/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of gears: 5, number of seats: 7, Year of construction: 1992, Number of doors: 4 Number of cylinders: 4 Maximum speed: 110 km/h Interior: black Itjdpjxvqtksfx Ag Isg Number of keys: 2

Condition: excellent (used), functionality: fully functional, power: 151 kW (205.30 HP), Year of construction: 2015, operating hours: 17,300 h, machine/vehicle number: 830.0.1803, Sennebogen 830, Cummins 151 kW, Dynaset magneto connection system Itjdpfev Dggaox Ag Isg

Condition: used, mileage: 80,272 km, power: 260 kW (353.50 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1835 Arocs 5 + MEILLER 3Skipper Fassi F125A 4x Hydraulic Extension 4x2 Suspension: Leaf / Leaf Wheelbase: 3.90 m Payload: 7,345 kg Meiller 3Skipper Type: D9 Fassi Crane mounted behind cab Type: F125A.2.24 5x hydraulic extensions 2x hydraulic stabilizer legs Special equipment: High engine tunnel storage, Front axle load 8.0 t, Driver’s airbag, Audio system: digital radio DAB / DAB+, Access with rooftop handrail, Passenger side mirror with maneuvering position, Battery 220 Ah, Interactive multimedia cockpit, Air horn, Driver assistance system: autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: lane keeping assist, Driver assistance system: traffic sign recognition, Cab: reinforced rear suspension, Cab: steel sprung, comfort, Suspension: rear springs 13.0 t, Suspension: front springs 8.0 t, 3-leaf, Remote query function Remote Online, Parking brake additionally on front axle, Vehicle without protective plate under front bumper, Speed limiter, Rear axle crown wheel 300, Hydraulic pump (Meiller pump - 7 pistons - 270 / 63), Interior filter for construction vehicles, Rear mudguard half-shells, Fuel filter heated, Fuel tank: 290 l aluminum, left, Reinforced engine brake, Navigation system, PTO MB 123-10c, Programmable special module, Wheelbase option 3900 mm, Chassis overhang 1200 mm, Smoker package, Rain sensor, Acoustic reverse warning (external warning signal), Rear window, Seat cover / upholstery: passenger seat velour, Seat cover / upholstery: driver seat velour, Seats in cab: driver's comfort air suspension seat, External sun visor, Sun protection blind side window, driver’s door, Itedpfsy Scp Esx Ag Ijg Steel wheels 11.75x22.5 (front axle), Extra 24V socket in passenger footwell, Front underride protection, Preparation for work lights, rear of cab top Additional equipment: Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Starting/front mirror heated, Trailer brake 2-line system, Connections left, Trailer socket 24V / 15-pin, AP axle (outboard planetary drive rear axle), Arocs 5, Exhaust tailpipe to vehicle center, Batteries arranged side by side, Compressed air connection in cab, Steel air tank, Air system with condensate monitoring, Medium air system, Automatic driving light activation (light sensor), Cab: movable cab entry, Cab: hydraulic tilting device, Cab: M ClassicSpace, 2.30 m, 320 mm tunnel, Suspension: leaf / leaf, Electric window lifters, Tinted windscreen, Alternator 100 A, Transmission 8-speed - Type: G 140-8, AdBlue tank: 60 l, Manual roof hatch (steel), Central locking system, Multifunction steering wheel, Steering oil cooling, Front air intake, 1-cylinder air compressor, Heated air dryer, Engine 7.7 l - 260 kW R6 diesel (OM 936), Engine variant OM 936, Ramp mirror, Residual heat utilization, Disc brakes with full protection, Disc brakes front and rear axle, LED side marking lights flashing, Seats in cab: passenger functional seat, Rear axle stabilizer, front axle stabilizer, 12V socket in passenger footwell, Front bumper corners in steel design, Truck Data Center 7 (fleet management system), Fixed rear underrun protection, Preparation Truck Data Center (fleet management system), Straight front axle, Gross vehicle weight 18.00 t, Transmission oil cooler We are also happy to assist you with financing/leasing solutions in cooperation with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: excellent (used), Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available Iedjb A H Elspfx Ag Ijtg -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg

Condition: used, machine/vehicle number: 1, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2008, next inspection (TÜV): 01/2024, loading space length: 12,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, Year of construction: 2008, Equipment: ABS, Rear tipping container key semi-trailer, year 2008, 3 disc axles with 1st liftable and 3rd steerable, ebs, housing for 40 feet container with cylinder for tipping, unloading pipes, electric impulse tipper,ADR, overhauled until 04.01.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Ijdpjixy Drofx Ag Istg