LPG Forklifts

Hyster H5.5FT

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Serial number: L177B31996J VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS. Blsdpfxoy Iv H Ne Ak Ejg

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): 2,277.00 € plus VAT Blsdpfovxid Rjx Ak Eeg Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.

Condition: used, Year of construction: 2010, operating hours: 1,283 h, lifting height: 3,150 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H3.5FT diesel forklift, Year of manufacture: 2010, Operating hours: only 1,283!, Previous owner: German Armed Forces, Rated capacity: 3,500 kg, Lift height: 3,150 mm, Duplex mast, hydraulic side shift, fork length: 1,200 mm, fork extension: 1,800 mm, Diesel engine: Kubota [48.5 kW/66 hp], Weight: 5,000 kg, Immediately available for operation! Blodpjy Ivt Nsfx Ak Esg On request, we can provide you with a tailored leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further information is available on our website. Subject to prior sale and errors! Cabin = Additional information = Lifting capacity: 3,500 kg Overall height: 225 cm Please contact Tobias Ebert for further details.

Condition: used, Year of construction: 2015, operating hours: 3,366 h, lifting height: 3,400 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H4.5 FT S5 diesel forklift, year of manufacture: 2015, hours: only 3,366h!, rated load capacity: 4,500 kg, lift height: 3,400 mm, standard mast, hydraulic sideshift, diesel engine [55 kW/75 hp], DuraMatch transmission, weight: 6,880 kg, immediately available! Upon request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale! Bodpfxoyund So Ak Eslg Cabin, rental possible = More information = Lifting capacity: 4,500 kg Please contact Tobias Ebert for more details.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: Bljdpfx Aketr U Hls Esg → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: excellent (used), functionality: fully functional, operating hours: 1,073 h, load capacity: 3,500 kg, fuel type: diesel, Equipment: cabin, front guard, pallet forks, Hystrer H3.5FT Sideshifter Long forks Diesel Bedpey Icvwsfx Ak Ejlg

Condition: used, Year of construction: 2011, operating hours: 3,510 h, lifting height: 3,600 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H3.5FT Diesel Forklift, Year: 2011, Operating hours: only 3,510h! Previous owner: German Armed Forces, Rated load capacity: 3,500 kg, Lift height: 3,610 mm, Duplex mast, hydraulic side shift, Fork length: 1,800 mm, Diesel engine: Kubota [48.5 kW/66 hp], Weight: 5,030 kg, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! Blsdpfoy H Uu Nox Ak Eog Cabin = Further Information = Lifting capacity: 3,500 kg Overall height: 245 cm For more information, please contact Tobias Ebert.

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t Bljdpowx R T Eofx Ak Esg weight of the machine ca. 13400 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,662 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, gearing type: automatic, fork length: 1,800 mm, tire condition: 70 %, front tire size: 300x15, rear tire size: 7,00-12, empty load weight: 8,010 kg, total height: 2,500 mm, total length: 3,300 mm, total width: 1,400 mm, maximum load weight: 5,000 kg, fuel: liquid petroleum gas (LPG), Equipment: lighting, pallet forks, sideshift, Fork positioner + sideshift Very good condition Bljdpjy A Rxcjfx Ak Esg We sell forklifts after a complete service. Ready for the end user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland, and we have many satisfied customers across Europe. We are also a manufacturer of EPAL EUR pallets and are recognized for our excellent quality and timely delivery. Before delivery to the customer, we thoroughly test the equipment and perform a comprehensive service inspection. All necessary repairs are carried out. The customer receives a forklift ready for immediate use. In Poland, at the customer’s request, we can arrange for the equipment to be inspected by the State Office of Technical Inspection. Our main mission is to ensure customer satisfaction and solve their logistics challenges. We understand how to prepare machines properly to meet our customers’ needs so that they are satisfied and willing to recommend us further. We invite you to contact us and take advantage of our services. Looking for a forklift supplier? Contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,662 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, gearing type: automatic, fork length: 1,800 mm, tire condition: 70 %, front tire size: 300x15, rear tire size: 7,00-12, empty load weight: 8,010 kg, total height: 2,500 mm, total length: 3,300 mm, total width: 1,400 mm, maximum load weight: 5,000 kg, fuel: liquid petroleum gas (LPG), Equipment: lighting, pallet forks, sideshift, Fork positioner + sideshift Very good condition We sell forklifts after a complete service. Ready for the end user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 Bsdpfey Ep D Tsx Ak Eelg WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland, and we have many satisfied customers across Europe. We are also a manufacturer of EPAL EUR pallets and are recognized for our excellent quality and timely delivery. Before delivery to the customer, we thoroughly test the equipment and perform a comprehensive service inspection. All necessary repairs are carried out. The customer receives a forklift ready for immediate use. In Poland, at the customer’s request, we can arrange for the equipment to be inspected by the State Office of Technical Inspection. Our main mission is to ensure customer satisfaction and solve their logistics challenges. We understand how to prepare machines properly to meet our customers’ needs so that they are satisfied and willing to recommend us further. We invite you to contact us and take advantage of our services. Looking for a forklift supplier? Contact us.

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table Bledpjmghawofx Ak Ejg -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,199 h, load capacity: 5,000 kg, lifting height: 4,140 mm, free lift: 1,310 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, fork carriage width: 1,310 mm, fork length: 2,400 mm, empty load weight: 8,140 kg, total length: 3,350 mm, drive type: Diesel, construction width: 1,410 mm, Diesel forklift Load center: 600 Bjdpju Dzqwefx Ak Eslg Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires Type: Superelastic Rear tires size: 28x9-15 Description: In addition to this Hyster model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this H5.0FT P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, full free lift,

Condition: excellent (used), Year of construction: 2016, operating hours: 15,068 h, fuel type: diesel, power: 74 kW (100.61 HP), color: other, U005B02318P = More information = Year of manufacture: Jun 2016 Lifting capacity: 3.500 kg Technical condition: very good Visual appearance: very good = Dealer information = Bljdpfxsymrv As Ak Eeg Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2001, condition: excellent (used), I sell bottom grinder Costa A1 ACT 1150, year 2001. Cylinder configuration with soft electronic segmented pad. Bljdpfjgq U R Njx Ak Ejg Working width 1150mm. Belts 1180x2620mm Press rollers for short work pieces. Fan for vacuum.included. Air blower for both units. Total weight 2500 kg. 2 motors 7,5 kW and 15 kW total power 27 kW Very good condition, serviced machine. Available immediately.

Condition: good (used), functionality: fully functional, machine/vehicle number: P177B09963T, Year of construction: 2019, operating hours: 10,424 h, load capacity: 3,500 kg, lifting height: 4,615 mm, fuel type: diesel, mast type: triplex, power: 34 kW (46.23 HP), empty load weight: 5,420 kg, Equipment: CE marking, lighting, sideshift, Hyster H3.5FT, year of manufacture 2019, 10,424 operating hours, triplex mast, fork positioner, sideshift, heater, fully enclosed cabin. Blodpjyh N A Tefx Ak Esg