Forklift

Hyster E 4.00 XL

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Gedpsvxh Iujfx Ak Ujbt Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Gedpfewaa Iujx Ak Uobt

Condition: used, functionality: fully functional, machine/vehicle number: 515xxxxxxxx, Year of construction: 1998, operating hours: 58,791 h, load capacity: 1,000 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, fork length: 1,000 mm, empty load weight: 1,545 kg, total length: 1,611 mm, drive type: Elektro, construction width: 980 mm, Electric three-wheel forklift Chassis number: 515xxxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Impulse Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery type: PzS Description: The unit is operational but is sold as is, as received from the customer. The unit has defects and is sold without any warranty/guarantee. The forklift has NOT been refurbished and has NOT been inspected according to UVV regulations. Sale only to dealers! Gbodpfjzif R Rjx Ak Uot Impulse control, full free lift, hydraulic steering, hour meter, discharge indicator, 24-volt battery (year of manufacture, Ah, and weight unknown), external charger included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 351 h, Linde E50 Electric Forklift | 5,000 kg | Triplex 5,365 mm | 351 hours | Battery + Charger Description For sale is a very well-maintained Linde E50 electric forklift from the 388 series. The vehicle is in excellent optical and technical condition and has only approximately 351 operating hours. The forklift features a triplex lift mast, hydraulic fork adjustment, a side shifter, a powerful 80V Triathlon battery (840 Ah), and the matching original Linde charger. In addition, fork extensions with a length of 2,400 mm are included in the scope of delivery. The DGUV and FEM inspection stickers are valid until 2026. Technical data: Manufacturer: Linde Material Handling Model: E50 Series: 388 Year of manufacture: 2022 Drive: Electric Load capacity: 5,000 kg Operating hours: approx. 351.3 h Lift mast: Triplex Lift height: 5,365 mm Free lift: approx. 1,516 mm Load center: 600 mm Fork length: 1,600 mm Fork extensions: 2,400 mm Tires: Superelastic Battery: Manufacturer: Triathlon Type: 6 PzS 840 Voltage: 80 V Capacity: 840 Ah Energy content: 63.9 kWh Year of manufacture: 2021 Charger: Original Linde PB Charger 80 V / 90 A Mains connection: 400 V / 50–60 Hz Equipment Triplex lift mast Hydraulic fork adjustment Side shifter 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Triathlon 80V battery Original Linde charger Digital driver display Inspection stickers valid until 2026 Accessories as shown in the pictures Condition Used. Very well-maintained overall condition with only approx. 351 operating hours. The forklift is clean, immediately ready for use, and only shows normal signs of wear on the forks. Availability!! The forklift will not be available until the end of August. An inspection is possible by appointment. Reservations are possible by agreement. Scope of delivery Linde E50 electric forklift 80V Triathlon battery Original Linde PB charger 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Accessories as shown in the pictures Note: The trolley/table shown in the photos, on which the charger stands, is not included in the scope of delivery. Shipping: Inspection possible by appointment. Loading onto a truck can be arranged. Expedited shipping throughout Germany and Europe is possible. Gedeznu Amjpfx Ak Usbt Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1982, Toyota fd15 Bj 1982 Gbsdoyvt Dbspfx Ak Uet Hours

Condition: used, Year of construction: 2004, machine/vehicle number: PR25, Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operating pressure (mould/injection): 180 barMotor-pump power: 74 kWPlasticizing power (100 mm): 37 kWHeating power (100 mm): 37 kWTotal installed power (100 mm): 198 kWCore pullers: 2Robot interface: YesAir circuit: 1Electric dosing motor: YesMachine dimensions (L x W x H): 11550 x 2600 x 2305 mmMachine weight: 39600 kgAdvanced Automation & Control SystemsThe U850 features a modern HMI with clear operational menus and diagnostic pages to streamline setup and production. The machine supports robot interface connectivity for automated part removal and downstream handling. Electric dosing and precise plasticizing power ensure stable melt quality and repeatable cycles. Safety controls and process monitoring are integrated through the control interface to maintain consistent, high-quality output.HMI control: multi-page interface with technical characteristics viewAutomation: robot interface enabled for pick-and-place and cell integrationPower architecture: motor-pump 74 kW; plasticizing and heating 37 kW each (100 mm configuration)Process monitoring: live readouts for temperature, times, positions, and pressuresProduction Line Integration CapabilitiesThis injection molding machine integrates seamlessly into industrial packaging and beverage production environments, supporting automated cells with robots, conveyors, and quality control stations. Its robust clamping unit and generous tie-bar spacing accommodate multi-cavity molds for components used in used bottling line refurbishments and second hand production setups.Compatible with automated part removal robots and conveyors Gsdpfx Aszkht Dok Ujbt

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm Gedpfx Aozvnpiek Usbt - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: good (used), ABUS Workshop Crane 500 kg Description: Gbodpszrw Exofx Ak Ust For sale is a professional, free-standing light crane system from the market leader ABUS (HB System series), manufactured in 2008. The unit is in very well-maintained, clean condition and comes directly from an active production environment. It is perfectly suited for workshops, metal fabrication shops, automotive facilities, or welding stations, allowing loads of up to 500 kg to be moved precisely and effortlessly. Technical Data & Details: Crane & Hoist Manufacturer: ABUS Kransysteme GmbH Hoist Model: Original ABUS ABUCompact electric chain hoist (Serial No. 05 08 0598 / 02) Load Capacity: Max. 500 kg (official ABUS marking present on the bridge) Design Type: Free-standing support structure made of solid I-beam steel sections. No ceiling or wall mounting required! Construction: High-strength bolted connections with large gusset plates and additional diagonal bracing for maximum structural stability. Floor Mounting: The pillars feature thick base plates for secure anchoring to the workshop floor using heavy-duty anchors. Power Supply: Professional, original ABUS festoon system (C-rail with cable trolleys) ensuring a tangle-free power supply along the entire length of the track. Operation: Includes original ABUS floor-level control (pendant control) with two-stage push-buttons and an integrated emergency stop switch for precise operation directly from the ground. Condition: Dismantled and ready for loading Pickup: Free of charge by the buyer Loading Service: A forklift is available on-site. We are happy to assist with loading onto your transport vehicle free of charge. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs on request!