AIR TO WATER REVERSIBLE HEAT PUMP

HITEMA INTERNATIONAL REVERSIBLE HEAT PUMP HFT.130

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg Nwjdjvghbqepfx Ah Heb OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER NOTE: AUTOMATIC NOZZLE CHANGE

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW Nedpfx Ajwrp Emoh Howb - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: as good as new (ex-display), Year of construction: 2021, 7-axis Romer arm with 1,200,000 points per second laser RS6 head, 2.5m measuring range. Complete with remote control, pcdmis software. It is a fantastic machine with automatic weight balancing. High productivity and accuracy with excellent ability to scan on any surface. Software available upon request: included PCDMIS CAD++ with MESH option. Nodpfx Aeipq Ivsh Hswb

Condition: used, Year of construction: 2006, functionality: fully functional, color channels: 5, paper weight (min.): 40 g/m², paper weight (max.): 370 g/m², paper width (min.): 400 mm, paper width (max.): 800 mm, paper height (min.): 260 mm, paper height (max.): 600 mm, input voltage: 380 V, Sakurai OL575SD - 5 Colors + Coater Year: 2006 Impressions: 50,000 Max Sheet Size: 60x80 cm Nwjdpfxowtzp To Ah Hob Double development cylinders Detachable grinding from unused printing units Printing speed: 15,000 sheets/hour SPC - Sakurai Plate Changing SAS - Sakurai Auto Set SCC III - Sakurai Colour Console - Type 3 Automatic washing Cloth blanket washing device IR Dryer (Grafix) Chambered doctor blade anilox coater

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Nwsdpfoipq I Isx Ah Hob Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 80 mm Nwodpfxow Rcams Ah Hob - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk Nwsdpfx Ahjxwnxge Hsb - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Condition: reconditioned (used), Year of construction: 2011, operating hours: 35,612 h, laser power: 3,000 W, Equipment: cooling unit, Rear Beam Loader 6500 mm - Exhaust 6500 mm - Round tube min 12 mm max 140 mm - Square/rectangle tube max 120x120 mm Nedpfx Aer Iz N Hjh Hewb

Year of construction: 2004, condition: good (used), coil, coil edge guide brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler Njdpfx Ahsmmc Uij Hjwb refrigerator electrical panel operator panel

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Nwedsw D Et Depfx Ah Heb Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.