Packing press

Henschel PS 3-30 / 30 B

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Fpedpfxsyx Axge Akyen Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Fedpfjzx Dwnsx Akyepn Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,379 h, load capacity: 5,000 kg, lifting height: 3,926 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, drive type: Elektro, Electric four-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 80V Fpodszbd Dhspfx Akysn Battery capacity: 930Ah Battery year of manufacture: 2020 Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, joystick, LED.

Condition: used, functionality: fully functional, machine/vehicle number: H2X387J00413, Year of construction: 2018, operating hours: 4,417 h, load capacity: 3,500 kg, lifting height: 3,515 mm, fuel type: electric, mast type: duplex, empty load weight: 5,551 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387J00413 Mast type: Duplex Fpsdpfx Akoz A Ipyeyjn Condition: Like new Technical condition: very good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Battery type: PzS Description: German: Linde E35L-01 No.: R0826 Year of manufacture: 2018 Operating hours: 4,417 h Lifting capacity: 3,500 kg Lifting height: 3,515 mm Mast: Duplex Battery: 80 V Equipment: Side shift, fork positioner, 3rd and 4th hydraulic valve, front and rear work lights, LED lighting, full cabin with heating and air conditioning, windshield wiper, rotating beacon, and interior mirror. Tires: Solid rubber, condition front and rear 80–100%. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Linde E35L-01 No.: R0826 Year of manufacture: 2018 Operating hours: 4,417 h Lifting capacity: 3,500 kg Lifting height: 3,515 mm Mast: Duplex Battery: 80 V Equipment: Side shift, fork positioner, third and fourth hydraulic valve, front and rear work lights, LED lighting, full cabin with heating and air conditioning, windscreen wiper, rotating beacon, and interior mirror. Tyres: Solid rubber, condition front and rear 80–100%. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Push forks, side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, interior mirror, rotating beacon, windshield wiper, LED.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,648 h, load capacity: 3,000 kg, lifting height: 4,680 mm, free lift: 1,394 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork carriage width: 1,150 mm, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Fpjdpfxjyn Swve Akyen Side shifter, 3rd valve, rear work light, front work light, heater, full cabin, air conditioning, interior mirror, rotating beacon, fabric seat cushion, clipboard with LED lighting, blue spot light (front), truck spot light (rear), LPG cylinder, double pedal