Sealing machine

Hagmann Power Packer 2311

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Blodpsu Ttf Nsfx Aknsp Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit Bodpfszqnxtex Aknolp - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ........, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Bledpfoxt N Twjx Aknep Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a long base ring, ø 3,000 Technical data / Dimensions Available quantity: 2 Volume: approx. 35,000 liters Container type: Silo Condition: used Food-grade: no Design: vertical Bsdpfx Akszy D Iienolp Internal diameter: approx. 3,000 mm External diameter: approx. 3,060 mm Cylindrical height: approx. 7,525 mm Overall height: approx. 8,785 mm Weight: approx. 1,800 kg Specific gravity of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Wall thickness, bottom: approx. 4.0 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell/cylinder: approx. 4 mm Operating temperature: 50°C Material / Properties Material, inner shell: Aluminum Material designation: AlMg3 Equipment Base design: Foot ring / base ring Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 60 degrees Top: 1 x Roof edge railing (height: approx. 1,200 mm) 1 x Self-closing door 2 x Crane eyes 1 x Manhole DN 600 with cover, ventilation slots and fall protection 1 x Flange DN 100 (level measurement) 1 x Flange DN 100 (filling) 1 x Threaded socket 1 1/2" (low-level indicator) 1 x Flange DN 250 Shell: 1 x Access door (approx. 1,400 x 850 mm) 1 x Filling line DN 100, terminating in a Storz coupling at the bottom 4 x Pipe supports for filling line 1 x Cable protection tube DN 50 1 x Threaded socket 1 1/2" for low-level indicator Bottom: 1 x Outlet DN 200 1 x Suction fitting The silo has a 60° cone. Notes: One of the silos has a single-rung access ladder with back protection (additional cost: €1,250) The currently connected or existing measuring and control technology will be included free of charge. However, no guarantee is given for its proper functioning. Documentation Drawing Container statics

Year of construction: 2025, condition: new, Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging; packaging thickness: 0.25-0.35mm; max. roll outer diameter: 400mm with standard core (70-76mm); max. drawing depth on one side: 12.5mm; max. molding surface: 120mmx210mm; vial height: 58~108mm; filling range: 1~50ml/vial; max. speed of the machine in neutral: 25 cycles/minute; power supply: 380V, 50Hz; power consumption: 17.5kW; compressed air and consumption: 6bar, 400L/min; cooling water: temperature 14~180°C, pressure 1.5~2bar, closed circuit 6L/min; machine dimensions: L7200xW960xH1800mm; weight: 2200kg. Bledjv Nk Aijpfx Aknep Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet Bledpfx Akow Ec U Ionep - Fanfold - Magnetic stripes - Air shock web width 360 mm