Control panel

GSL für Hubarbeitsbühnen

Condition: used, Control desk, control unit Blodpfx Akecgqc Ionsp -Control desk: for driving work platforms from GSL (German Standard Lift) -without: content and controls -universal: applicable -Number: 24x modules available -Price: per piece -Dimensions: 280/250/H360 mm -Weight: 6.2 kg

Condition: new, total length: 6,690 mm, Year of construction: 2026, load capacity: 65,000 kg, Crane JMG MC 650S Drive Electric Bljdpfx Akey Eh Itjnsp Year built 2026 Lifting weight (kg) 65,000

Condition: used, Control desk, control unit -Control desk: for driving work platforms from GSL (German Standard Lift) Bodpfecgqc Rsx Aknelp -universal: applicable -Number: 5x modules available -Price: per piece -Dimensions: 280/250/H360 mm -Weight: 8 kg

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Bsdpev Spvmsfx Aknjlp Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Blsdjxwqk Ejpfx Aknsp Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Blodpfxjv Nw A No Aknsp Swing over bed: 1050 mm Distance between centers: 6000 mm Swing over carriage: 840 mm

Condition: good (used), Center height: 1,000 mm Distance between centers: 15,600 mm Maximum diameter allowed above the bed: 2,019 mm Maximum diameter allowed above the carriage: 1,625 mm Diameter of the faceplate: 1,800 mm Maximum clamping between chucks: 1,500 mm Maximum load: 75 tons Spindle motor power: 82 Approximate dimensions: Length = 21,570 mm, Width = 4,765 mm Accelerated carriage travel: 2,000 mm/min Bedozbt S Ispfx Aknolp Metric thread possibilities: from 2 to 25 mm Maximum thread length: 800 mm Minimum distance from faceplate to tool: 2,000 mm Accessories: 2 faceplates with a diameter of 1,100 mm on a traveling steady rest 2 steady rests, 150 to 450 mm 2 steady rests, 450 to 750 mm 2 steady rests, 750 to 1,000 mm (on a traveling steady rest) Videos available.

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Bledpfjwywgbjx Aknep Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Bedpfx Aszcm Rmoknjlp Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine Blodpfx Ajxbmploknjp