Low loader semitrailer

GOLDHOFER STZ-L5-50/80A Tieflader 24m Zwangsgelenkt

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) Iodpfx Agsrgzv Ne Ijib * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload weight: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis number: YAMT14XX4N0107629 Year: New and unused (2023) Weights/Loading Capacity: King-pin load: 23,000 kg Axle load: 12,000 kg (per axle) Total axle load: 48,000 kg Gross vehicle weight (GVW): 71,000 kg Empty weight: 16,535 kg Payload: 54,465 kg Axles: - Axle brand: BPW - Hydraulic steering - Pneumatic suspension with raising/lowering valve - WABCO braking system - Tyres: 245/70 R17.5 Michelins (Load index 146/146 F) Iisdsuu Hcfepfx Ag Ieb - 1st axle liftable Dimensions: Loading length: 9,300 mm Extensions: 6,500 + 6,800 mm Loading floor width: 2,540 mm Loading height: 900 mm Additional Equipment: - Double extendable loading platform - Container locks - Width outriggers + timber infills for width extension - Lashing rings - Double folding ramp set - Central lubrication - 1x spare wheel + holder - JOST landing gear - 24V electrical system - 2.0" king-pin - One galvanized steel headboard - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information: Year of manufacture: 2023 Axle Configuration: Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; Steerable; Axle brand: BPW; Tyre tread depth (left inside/outside, right inside/outside): 100% each Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Weights: Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functional: Loading height: 900 mm (manufacturer’s specification; previously given as 65535 cm is a clear data error) Extendable body: Yes Condition: General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information: Price: On request Further Information: Please contact Stefan Schaapveld for further details.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg Gross vehicle weight (GVW): 106,000 kg Unladen weight: 23,480 kg Payload: 82,520 kg Axles Axle brand: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle with friction steering 2nd axle rigid Axles 3 to 8 with hydraulic steering Axles 1 & 2 liftable Tyre size: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max. extended length: 24,500 mm Loading platform length: 12,300 mm to 20,600 mm Loading platform width: 2,750 mm Loading platform height: 955 mm King-pin height: +/- 1,280 mm Additional Equipment Operated by truck hydraulics Hydraulically operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin size: 3.5” Central lubrication system Oversized load marker boards Radio remote control = Further Information = General Information Year of manufacture: 2009 Axle Configuration Tyre size: 235 / 75 R17.5 Axle brand: BPW Suspension: Hydraulic suspension Rear axle 1: Twin tires; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Twin tires; lift axle; max. axle load: 10,000 kg Ijdpfx Agjwwkrls Ioib Rear axle 3: Twin tires; max. axle load: 10,000 kg; steered Rear axle 4: Twin tires; max. axle load: 10,000 kg; steered Rear axle 5: Twin tires; max. axle load: 10,000 kg; steered Rear axle 6: Twin tires; max. axle load: 10,000 kg; steered Rear axle 7: Twin tires; max. axle load: 10,000 kg; steered Rear axle 8: Twin tires; max. axle load: 10,000 kg; steered Weights Unladen weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading platform height: 96 cm Extendable frame: Yes Condition Technical condition: Very good Visual condition: Very good Financial information Price: On request Further information Please contact Stefan Schaapveld for more information.

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 2,750 mm, total width: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, forced steering, lifting+lowering, lashing eyes, 2-section ramps, hydr. ramps Superstructure: hydr. liftable low bed, hydr. ramps Trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR and much more, and was then no longer in use Widenable from 2750mm to 3250mm, loading length in drop deck=5850mm, loading length over axles=4250mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over the axles approx.: 940 mm. 1/3 of the low bed can be raised hydraulically! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Isdpfx Aoi Rqi Sjg Ioib - .

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: - King Pin Load: 38,000 kg - Axle Load: 12,000 kg - Total Axle Load: 96,000 kg - GVW: 134,000 kg - Unladen weight: 33,750 kg - Payload capacity: 100,250 kg Axles: - Axle brand: BPW ECO PLUS - Hydraulic suspension - 7 steered axles (axle 2 rigid) - First two axles liftable - Drum brakes - SN 3020 brakes for ABS with sensors - Tires: 245/70 R17.5, twin tires - Load index: 143/141J Dimensions: - Length: 17,700 mm - Extensions: 19,500 mm - Max. extended length: 37,900 mm - Loading floor width: 3,990 / 3,450 mm - Loading floor height: 1,050 mm (+/- 150 mm) - Total height: 3,815 mm Additional information: - NATO connector - Hydraulically foldable ramps - Outriggers and planks for widening the loading floor - Electro-hydraulic pump for trailer functions - Spare wheel with holder - Working lights - Rear bumper with lights - Kingpin 2.0” - Central lubrication - Lashing rings - Wooden loading floor - Marker boards for oversize loads - Remote control General information: - Year of manufacture: 2024 Axle configuration: - Tire size: 245/70 R17.5 twin tires (143/141J) - Axle brand: BPW ECO PLUS - Brakes: Drum brakes Iiodpjuu E Tiofx Ag Iob - Suspension: Hydraulic suspension - Rear axle 1: Twin tires; Lift axle; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 2: Twin tires; Lift axle; Max. axle load: 12,000 kg; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 4: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 5: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 6: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 7: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% - Rear axle 8: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Weights - Unladen weight: 33,750 kg - Payload: 100,250 kg - Gross vehicle weight: 134,000 kg Functionality - Loading height: 105 cm - Extendable body: Yes Condition - Overall condition: Very good - Technical condition: Very good - Visual condition: Very good Financial information - Price: On request Further information Please contact Stefan Schaapveld for further details...

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Year of construction: 2010, Equipment: ABS, Nooteboom MCO-50-04V - 4 x steering axles - BPW axles - Remote steering via cable - Coupling height: 95 cm - Total extended length: 26.53 m - Load bed: 903 cm + 650 cm + 650 cm - Loading height (laden): 82.5 cm = Further information = Axle configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Steering; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 2: Twin tyres; Steering; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 3: Twin tyres; Steering; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle 4: Twin tyres; Steering; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg Iiedpfeyf A Srsx Ag Isb Gross vehicle weight: 48,400 kg Maintenance MOT (Main Technical Inspection): valid until 10/2026 Financial Information Price: On request Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDAB = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Russian spoken. We make every effort to provide correct information, however no rights can be derived from the content provided.

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status Isdou Sd U Uopfx Ag Ioib * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, maximum load weight: 91,640 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full specification available upon request. Gooseneck * Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook couplings front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical bolt coupling for front connection of a low-bed, rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) Iijdpfx Agjuvbdte Ieb * Hydraulic axle compensation * Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection * Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication system for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication system for one 3-axle bogie * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart * Steel mattresses with rubber flooring approx. 12 mm thick * One 7-pin socket left and right, front and rear of the rear bogie for warning signs * BEKA-MAX central lubrication system for one 5-axle bogie * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm Iedpfx Asyhkqnjg Ijib * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: used, empty load weight: 20,000 kg, maximum load weight: 66,000 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, first registration: 12/2013, next inspection (TÜV): 03/2026, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 245/70R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Air suspension, 6 axles, BPW axles, 1st axle liftable, forced steering, lift and lower function, ABS (anti-lock braking system), central lubrication system, extendable, width expandable up to 3m, lashing rings, hydraulic ramps, front support, rear support, EBS. Body: Telescopic extension by 7m. Fully extended: 21.25m, bed length: 10 - 17m. Storage box on gooseneck: L: 2450 mm, W: 2450 mm, H: 450 mm. 2-inch kingpin, 5 hydraulically/mechanically forced-steered axles, 5 x 10t BPW axles, 2 central lubrication systems, hydraulically adjustable gooseneck, hydraulic pump powered electrically by the tractor unit (hydraulics can also be connected from the tractor unit), radio and cable remote control. Iodpfsxc Nztsx Ag Ijib Tyres between 50 and 80%. ACCESSORY DETAILS WITHOUT LIABILITY, changes, prior sale, and errors excepted!