Scissor lift

Genie GS5390 Diesel, 4x4 Drive, 18.15m Working Height, 6

Condition: used, Year of construction: 2014, operating hours: 1,833 h, machine/vehicle number: GS9014-49482, fuel type: diesel, Empty weight: 7.906 kg Lifting capacity: 680 kg Working height: 1.815 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Transport dimensions (LxWxH): 4.88x2.3x2.47 Please contact PFEIFER GROUP for more information Bedpfx Aewvpnvjp Aolh

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Bsdpefu Itbefx Ap Aslh Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, Year of construction: 2019, operating hours: 1,121 h, machine/vehicle number: GS90D-2594, fuel type: diesel, Empty weight: 8.430 kg Lifting capacity: 680 kg Working height: 1.815 cm Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Transport dimensions (LxWxH): 4.88x2.3x2.47 Please contact PFEIFER GROUP for more information Blodpfx Aeyxvtdep Aeh

Condition: used, Year of construction: 2014, operating hours: 1,936 h, machine/vehicle number: GS9014-49479, fuel type: diesel, Empty weight: 7.906 kg Lifting capacity: 680 kg Working height: 1.815 cm Bledpfx Aowux Ivop Aoh Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Transport dimensions (LxWxH): 4.88x2.3x2.47 Please contact PFEIFER GROUP for more information

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Edge rail on neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: Bljdjxpi A Rspfx Ap Ajh MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle.

Condition: used, Year of construction: 2012, operating hours: 2,589 h, machine/vehicle number: GS9012-48009, fuel type: diesel, Empty weight: 8.147 kg Lifting capacity: 680 kg Working height: 1.815 cm Bedpov R Sy Ejfx Ap Ajlh Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 4.88x2.3x2.47 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, functionality: fully functional, Machine for drilling holes for dowels URBAN DB 3100, year 2007 Condition: very good Bsdpfxowinq Nj Ap Aslh - Profile clamping system and drill feed operated by foot switch - Electric drilling motor switches off automatically at the end of the drilling process - Drill feed speed and drilling depth individually adjustable - Quick-clamp chuck for standard drill bits up to max. Ø13mm - Left and right support tables

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested Bedpfxeb A Ii Sj Ap Aolh

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC Bjdpfx Apey Hl Iyo Aslh - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: refurbished (used), After refurbishing, our Leybold Sogevac SV630B Rotary Vane Pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts Bljdsfq D D Nepfx Ap Aeh be available at short notice included one-year warranty