Glass transporter

Ford Transit 2.5 TDI KA Hoch HEGLA GLAS Luftfederung

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, tempering furnace reconditioned 2022 Hodpjwinuhofx Ag Djfr

Condition: used, mileage: 117,500 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2020, DAF CF 480 FAN WITH CRANE FASSI F235 A.2.23 E-DYNAMIC + TAM T20SN56100 + WEIGHING SYSTEM equipped for containers from 380 cm to 620 cm and 700 cm with extendable bumper Hedpfx Asvivt Hsg Dsfr wheelbase according to coc: 670 cm axle 1-2: 530 cm axle 2-3: 140 cm FASSI F235A.2.23 E-DYNAMIC Crane + TAM T20 SN 5.600 Hook system slewing moment: 17.13 tm. maximum boom extension: 10.5 m slewing range: 400° torque value: 30.8 kNm Oil tank: 120 litres Weight of crane in standard version without oil and parts: 2,630 KG Photos may differ from actual condition. Vehicle has always been properly maintained. = More information = Drive Tank capacity: 620 litres Transmission Transmission: TRAXON, 12 gears, Automatic Axle configuration Front axle: Tyre size: 385/65 R22.5; Max. axle load: 900 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: parabolic suspension Rear axle 1: Tyre size: 315/80 R22.5; Twin tyres; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right inner: 50%; Tyre profile right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 7400 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Dimensions Dimensions (LxW): 910 x 255 cm Functional Brand body: TAM T20SN56100 Pump: Yes Financial information Price: On request Identification License plate: CKR08

Condition: new, LIFTING EQUIPMENT FROM 5 - 10t WEIGHT Hfedpsi Akpdsfx Ag Dsr TRANSPORT TROLLEYS FROM 5 - 30t WEIGHT A LOT OF VARIETY NEW IN STOCK

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information. Hfsdpsh U Damsfx Ag Djr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Hfsdpfjwd Ertjx Ag Der Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec FPS-25/20U2 2011 Hsdovy Ef Hepfx Ag Defr Lisec gas press 2000 x 2500 mm Right-Left S-IGL-1892

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Hodpfx Aer Ak Exjg Defr Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol Hfodpfxsrrvkbj Ag Der The machine will be completed and tested in simulation mode prior delivery

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Gas filling press: Models and triple available Hedpowikn Rofx Ag Defr

Condition: excellent (used), Year of construction: 2000, picture frame stapler. Pneumatic control, efficient device. TYPE minigraf 44, Alfamachine company Hfsdpovtzp Ujfx Ag Djr