Trailer Swap Chassis

Fliegl Tandem-Wechselanhänger TWP 180 Mega-EL

Condition: used, machine/vehicle number: WFDFLT21802036332, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Weights and Dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Bogie load: 18000 kg - Nose weight: 1000 kg - Unladen weight (base version) approx. only: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in travel position approx.: 1070 mm - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking device approx.: 985 mm - Locking distance: 5853 mm - Coupling height approx.: 380 mm - Drawbar length set from 7820 mm swap body stop approx.: 2200 mm - Parking heights apply on level ground. - The towing vehicle must have a similar lift range to the trailer, otherwise the unit will stand at an angle. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) Ndsdpfxjzu I D Rj Ahkea - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm Njdpfx Ahezufl Sekoda AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 14,780 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for swap body with central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Swap Guard – swap body guide, in front of and behind each container lock 4 container locks with sturdy 20"-based arms for 7.15, 7.45, and 7.82 swap bodies 1 pair of front gear support legs, with straight lower section and single-sided operation on the right side 2 wheel chocks with holders Aluminum side impact protection Steel underrun protection Ndsdpfxjzd Tw Ij Ahkja Rear mud flaps across the entire width (not compatible with forklift mount) 4 half-shell fenders Mud flaps Spare tire mount for 1 electric bike, with wheel mounting kit Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight forwarding version (not suitable for trucks with tail lifts; detailed verification may still be required on a case-by-case basis) Towing bar coupler, free towing bar length approx. 2200 mm Folding bracket with spring assistance on the towing bar, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Braking System with EBS connector at the front, including connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 Additional LED work light(s) at the rear, activated via the reverse light *Country of registration/license plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted per customer request