Working platform semitrailer

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

Condition: new, overall weight: 55,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Year of construction: 2025, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full specification available on request. LOAD AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Load floor in double-extendable design, length approx. 9,300 mm * A support plate approx. 200 mm wide is permanently welded to the center beam * Pneumatic locking system with conical locking pin and reinforced locking positions, supply lines are protected within the extendable beams and automatically adjust to each load floor length (except for the supply to the first lock) * Technical fifth wheel load: 25,000 kg For tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lowering valve * 275/70 R 22.5 3PMSF twin tires. Brand of our choice * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connectors on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards * At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted in the load floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1x rear of the gooseneck * 2" kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm hardwood floor on gooseneck and load area enclosed in ALU-omega profiles * 10 pairs of recessed lashing rings in the outer frame of the load area, foldable outwards: - one pair in front of the last axle and at the rear cross member of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel Kedpexc Axxofx Ahvjdi * Remote steering (front and rear) operable via cable remote control, with single-track tracking of the axles, without installation in the tractor unit * Steel front wall, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connector * 3 transverse stake pocket rails mounted in load floor of load area, for plug-in stakes approx. 100 x 50 mm * 1 additional removable platform, approx. 500 mm wide, for large cross-section sliding tube, with hardwood covering * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the right in direction of travel * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel * WADER container pockets in the load area for transport of: 1x 20' container at weight center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1550437, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Ksdpjwgxngofx Ahvodi

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 950 de Luxe In-Line Kdodevfd Rfspfx Ahvei Year of construction: 2006 Dimensions: approx. 2500 x 1650 x 2100 mm (LxWxH) Weight: approx. net 800 kg / gross 880 kg Technical Data: Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 920 mm, bottom 920 mm Working height: 815 - 915 mm Passage height: 500 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 25 L/cycle Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 950 HV Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical Data: Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of the heated tunnel hood: 1700 mm Length of the additional insulating hood: 2200 mm Tunnel outlet, extended: approx. 600 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 39 KW Rated current at 400 V: 56 A for single operation Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrinking results even with shrinking results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kollbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kedsv N U U Njpfx Ahvedi Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Description: - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Counter stacker - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Description updated

Condition: used, Year of construction: 2003, The Mueller Martini CB 16 stacker, manufactured in 2003, is a robust and efficient solution for stacking and organizing printed materials. With a format of 500 x 340 mm, this stacker is currently in production and located in the United States. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The machine is in good condition, ensuring reliable performance for various stacking tasks in printing and finishing applications. Kjdpevmnfpjfx Ahvsdi Format: 500 x 340 mm Equipment: Good condition without any damage

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines Ksdpfx Ahorf U Iiovodi • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right

Condition: reconditioned (used), Year of construction: 2018, Gathering Elements (=3 stations) Ksdpfxjvrca Se Ahvodi for elongation of an existing perfect binding line or solo gathering machine

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New This machine is suitable for industrial cleaning, both for smaller tasks and large-scale projects. The main advantage of this unit is the absence of the latest generation of electronics, which makes it highly reliable and robust. It is considered one of the most aggressive machines in its class. This particular unit is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine (151 Operating Hours) Complete with the following accessories: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) This is one of the best dry ice blasting machines available worldwide. With no complex electronics, it is renowned for its reliability and low maintenance costs. Kedpfx Aswg R Rmohvsdi For inquiries or to schedule a viewing, please contact us at Dr.Dryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines, as well as supply new models. Contact us for more information. Worldwide shipping available. [Keywords for search: Cold Jet dry ice machine for sale, dry ice blasting machine, industrial dry ice blaster, used Cold Jet, second-hand dry ice blasting machine, cryogenic cleaning equipment, CO2 cleaning machine, mat cleaning without disassembly, fire and soot cleaning, food industry cleaning equipment, automotive dry ice cleaner, printing press cleaning, high pressure dry ice blaster, non-abrasive cleaning system, refurbished dry ice blasting machine, Venturi nozzle, 20 ft hose, compatible with Cold Jet, Kärcher, ASCO Jet, Cryoblaster, Cryonomic, and more. Export available.]

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: - Length of conveyor: 25 mtr Kdsdewx Ii Ropfx Ahvji - Delivery to the right

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Kdsdpevbmtbofx Ahvsi Technical condition: good Description: Year 2017 ISO 4A (61 cm) Capacity 6500 kg Rotator Opening range 500-1300 mm Width 930 mm Contact pads 280x1200 / 280x500 mm ID OS1413