Working platform semitrailer

FAYMONVILLE MAX Trailer MAX210 Telesattel

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,400 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) Dedew Tpr Ispfx Af Ijcn * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2025, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. - Load area in a double-extendable version with pneumatically operated locking mechanism - A fixed intermediate table, approx. 250 mm wide, mounted on the central beam - BPW axles and suspension, all axles hydro-mechanically forced-steered - Air suspension with lift and lower valve - Tyres: 385/65 R 22.5 - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) - Braking system according to EU regulations with EBS-E (2S2M) - Disc brakes - 2-inch kingpin - Electro-hydraulic unit - Remote steering from the front and rear via cable remote control - 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area - Load gauge for axle load determination, including load diagram - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container - 5 pairs of crosswise mounted stake pocket strips in the load area - Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall - One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right Dcodpepkx Eaefx Af Ijn - Central lubrication system with 2 BEKAMAX pumps (Pico) - 2 LED reversing lights mounted on the rear panel - Acoustic warning signal when reversing - Collision protection left and right on the rear crossmember - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - HRM metallization (High Resistance Metallisation) - Single-colour paintwork in RAL 3002 carmine red

Condition: new, overall weight: 48,000 kg, maximum load weight: 34,660 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Loading Platform * Double extendable version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tension belts (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles hydro-mechanically forced steered * Air suspension with lift and lower valve Braking System * According to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including Accessories * Remote steering from front and rear via cable remote control with push buttons, with single-track control (no installation in tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder mounted on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection strip at the front * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer Djdpfx Aok Ugacsf Iocn * European reflective signs (red-yellow) on the trailer's rear * One mudflap on the trailer's rear * Manual and instructions on USB stick * Loading platform with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Galvanized supports under the inclined section of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Hook-in rail for ALU access ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load chart * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection cover * Spiral cable supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with connector (NATO-NATO) * Coated sand layer on the central beam as anti-slip protection * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of crosswise stake pocket rails mounted in the loading platform, for 100 x 50 mm plug-in stakes * Storage for up to 9 pairs of plug-in stakes, approx. 100x50 mm, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the loading platform left and right in the direction of trav