Fabric cutting machine

EASTMAN BLUE STREAK X

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Dcjdpfsuanq Tjx Akcsg

Year of construction: 1996, condition: ready for operation (used), Working width: 2300mm, max. roll diameter: 1500mm, working speed: 180m/min, including crane track and longitudinal cutting system, shaft, belt and wiring overhauled. Dodpsd Hr Uzefx Akcscg

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Djdpfx Akertnccjcocg

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Dsdpfjww Sy Djx Akcscg Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2001, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 18 to Clouth guiding system for knitted fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side links Drive side rechts Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl main drive motor 15 kW total power requirement 20 kW weight of the machine ca. 6 t Dodpfetv Imtsx Akcjcg range L-W-H 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough entrance • 3-Roll-compensator at outlet of the machine, self-aligning roll can be pneumatically loaded and unloaded • Machine in complete condition, New FI control is still being added

Condition: used, Year of construction: 2025, Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure aus Edelstahl • 2-roller padder with supporting roll and swimming roll, Küsters system, • additional new frequency drive for fitting the machine into a system is Dcjdpfxou Rt R Nj Akcjg possible. • Photos show similar machines in delivery condition • Warranty: 12 months • This machine is completely manufactured after receipt of order.

Condition: used, Year of construction: 2025, Working widths 5600 mm Roller width 5800 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 28 N / mm Pressure total 16,5 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =13 kW Hydraulic unit for combined pressure aus Edelstahl new 2-Bowl-Paddrer with Swimming roller, System KÜSTERS, (Photo shows an overhauled machine in delivery-status), • additionalnew frequency drive for adaptation into a plant is possible, Djdpfsupmf Asx Akcscg (extra-price)

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD Dcedpfxopitkgj Akcog 6 kg Find more textile machines - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 9375, working width: 3,000 mm, Possible technical specifications (based on comparable models) Needle configuration: 2-needle, suitable for hemming with pleats. Cylinder arm: For efficient processing of round garment parts such as sleeves and waistbands. Speed: Depending on the specific model and application; comparable machines reach speeds of up to 6,500 stitches per minute. Options: Automatic thread trimmer. Dust extraction system. Label feeder system. Side seam turning system for automatic turning of side seams. Applications Hemming T-shirts, polo shirts, sweatshirts, and sportswear. Processing of waistband and sleeve hems with high productivity and consistent quality. Ideal for production environments where speed and consistency are essential. Lot is located in a crate. Year of manufacture not readable. Dcjdpfswt Rcpex Akceg Crate dimensions: Length 305 cm Width 155 cm Height 152 cm

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C15C2S300451, fuel type: diesel, motor manufacturer: Caterpillar C15, General information Field of application: Construction Weights Dsdpfx Aksx Svhzscocg Empty weight: 5.071 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 84.1 Liter / Hour at 75% Load Generator: Caterpillar A2985L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Transport dimensions (LxWxH): 4,93x1,66x2,32 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank