Generator

Dieselagregat/Strom

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Kedpfx Askwcdbop Aslw Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Kjdpfsyvuh Iox Ap Aslw Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW Klodpfx Aeyt H H Nep Aew * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Table 1000 x 1000 Klsdpjt T Rkdofx Ap Ajw

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Kodpfewp E E Djx Ap Ajlw Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW Ksdpfx Ajlhwr Rsp Aolw - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 SP Model: TM500 8P Year of Manufacture: 1979 Kljdpfx Aex Dbydop Asw Chuck diameter: 6300 mm Max. turning diameter: 15000 mm Max. workpiece height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Max. workpiece weight: 80 tons Side tool post section: 360x360 mm Side tool post travel: 2500 mm Machine weight: approx. 230 tons Video available Milling and hobbing heads available

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 Klodpeuhbplsfx Ap Aow - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Kljdpfxsd Nw Ttj Ap Asw Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000 Klsdpfst Rkcuex Ap Ajw