Chiller

DAIKIN Industries AKZW 458-C-A-244B

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Nsdpfx Ajhy Tp Djmyewi Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Nwedpfx Asw Hzyxomyoi Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system Nwsdpox D Eccefx Amyoi • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: excellent (used), Year of construction: 2018, Power: 6.5 / 9.4 kW Net weight: 365 kg Several of these units are available! Loading and/or shipping is possible! Nwedpfxem Exdwe Amyoi

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Njdpfx Asxzq Sksmyswi Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: excellent (used), Belt grinder with compressed air drive, The device requires water and compressed air connection, Nwsdpfxsp N Duwj Amyoi With the purchase of the device, new sanding belts worth €200 are included (free of charge). Dimensions of the product: Length: 470 mm, Width: 460 mm, Height: 170 mm. Weight: 5.6 kg.

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads Nwedpfxorz N Imj Amyoi The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses. Nwodpfxstv Ewdj Amyoi

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Nwsdjtxitcepfx Amyoi Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Nodpfsywzv Ijx Amyswi Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted