Second-hand machinery for sale (283)

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Dwsdpfx Aobtnftekvoa Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Dsdpfxebunq Hs Akvowa Location: 54634 Bitburg Available immediately

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Dedpfx Akjbuqn Hovowa Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking Dwodpfx Ajbu Dziekvea - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Suitable for almost all common shredders/granulators Dsdobxu Dhjpfx Akvjwa Available from stock in Bitburg Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° Dedpfx Aksdqzbnevowa V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Djdpfjdqzcxex Akvswa Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Dwjdpfx Akjcnxamsvsa Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Dedpfx Akjcnxc Revswa Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder Dsdpfecnxrcsx Akvjwa rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Year of construction: 2026, Oversized doors for loading and unloading. 2 exhaust openings (1 exhaust connection ø 92 mm and 1 exhaust nozzle ø 64 mm) for connecting a dust extraction system. Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting materials, e.g. quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Optimal visibility and work protection during workpiece processing thanks to the viewing window with an applied protective film. Dust-free operation due to all-round seals on the lid and door frame. Sturdy shelf grid allows placing workpieces inside the cabinet. With a discharge opening for changing the blasting material. Suction pipe for the blasting material is attached to the bottom of the collection container. With compressed air connection on the outside. Stable due to rubber feet. Scope of delivery: High-quality blasting gun with ceramic nozzle 4 ceramic nozzles (4/5/6/7 mm) 12-volt fluorescent tube with 230-volt power supply and external switch Incl. 5 replacement films for the viewing window Two large, integrated latex work gloves Model: SSK 2 Article No.: 6204001 Dodpocqm Sbofx Akvswa Technical Data Volume of the work chamber: 220 l Air consumption: 200 - 500 l/min Working pressure: 2.8 - 8 bar Compressed air connection: 3/8" Abrasive grain size: 0.42 - 0.125 mm Internal dimensions: 840 x 550 x 360 mm External dimensions: 950 x 660 x 1380 mm Weight: 55 kg Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Dwodpfx Akoi Amnpsvoa Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and Dwodjr Ig H Topfx Akvea RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Dodpfxefh Hahe Akvowa Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. Dwodpfxofig Rwo Akvja The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: Dwsdpfx Akohk Dfksvoa This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard chassis Dimensions and weights Chip collection volume 175 l Nominal outer diameter of extraction nozzle inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Dsdpfx Aehk S Szokvswa Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Dwsdpfx Aohp Rdlekvsa Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Dodpfsff Ed Tex Akvswa Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Dwjdpfx Aksff Hdfevea Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Dedpfsff Hdgex Akvewa Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Djdpjff Hdmsfx Akvowa Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Dwsdpfx Asd Tyaaskvsa Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. Dwodpfx Akoy Ehrxsvja SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Dwsdpsr Igzcefx Akvoa Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -