Second-hand machinery for sale (282)

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm Fpsdpfeutmw Hex Akvek 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Fpsdpfx Aozbyt Ejkvok Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: Fpedpfxew D T Dke Akvsk T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Fjdpfxopdqzxj Akvjpk Location: Ex warehouse 54634 Bitburg - immediately available - The pictures show a machine without a discharge auger; it will be in stock soon.

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. User-friendly operation thanks to Siemens PLC control To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Foreign object-resistant conveying screw thanks to cardan suspension The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg Fpodpfx Asil Hggskvjk - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Fodpfx Akscnz U Eevopk Location: Ex works - free loading

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, Fpjdpey E T Ufefx Akvjk without warranty or guarantee

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation Fodeyvv Ngopfx Akvopk 2 manual clamps Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2005, condition: good (used), Wing trolley with 2 x 6 rungs Rung trolley Order picking trolley Mobile Fsdpfsxacubox Akvopk Length: 1.1 m Rungs: 0.55 m Height: 2 m Location: in stock 54634 Bitburg - immediately available -

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with a 500 L tank Air outlet: ¾" Dimensions and weights Length (product) approx.: 2020 mm Width/Depth (product) approx.: 570 mm Height (product) approx.: 1340 mm Weight (net) approx.: 245 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Input power: 6.52 kW Noise emission Sound pressure level Lp: 83 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compression system: HOS Intake capacity approx.: 950 l/min Delivery capacity approx.: 750 l/min Explanation of delivery capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 2 Fodpfxolczl Uo Akvepk Compressor speed: 960 min⁻¹ Compressed air tank Maximum pressure: 10 bar Tank capacity: 500 l Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw Fedpfx Akjv Sg T Novjpk OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Fjdpjxvivqefx Akvepk Location: ex-site Saarland

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Fpedpfx Ajxw N Sbjkvok Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available - Fpodpfx Akoxgvcxjvok

Year of construction: 2022, condition: new, XSD310, 400 Volt Fsdpfsdkl Sqex Akvjpk Weight: 280 kg Jointer Jointer width: 310 mm Total length of jointer table: 1400 mm Diameter of cutterhead: 70 mm Spiral cutterhead RPM: 5500 Dimensions of jointer fence: 1300 x 150 mm Bevel adjustment of jointer fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power: 4 HP Thickness planer Dimensions of thickness planer table: 430 x 310 mm Throat of thickness planer: 230 mm Diameter of feed rollers: 30 mm Feed rate: 6 m/min Accessories: Spiral cutterhead Handwheel adjustment for thickness table with mechanical display Location: In stock at warehouse 54634 Bitburg The machine is on display at our showroom and is available immediately.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Fedpsdwh E Asfx Akvspk Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: new, Year of construction: 2026, Type designation and technical data The outstanding advantages: Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Fpjdpfeb R D U Sjx Akvek Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Fsdpocdr E Aofx Akvjpk Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Fedpfoci Tvhjx Akvopk Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking Fpsdpfx Akjd Hx Hpjvek TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Fpedod Hx Uqepfx Akvok Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h Fsdpsbpg Ncsfx Akvjpk • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Planer-thicknesser machine with 520 mm planing width and motorized thickness table adjustment Stable steel cast iron construction Large, ribbed planer tables made of cast iron, annealed to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure shoes in the infeed 4-knife cutterhead, precision-mounted Helically toothed steel feed roller for particularly even and gentle wood feed Take-off roller with rubber coating Large planer fence, adjustable 90°-45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutterhead Knife changes in seconds When the machine starts, the knives are automatically tensioned by centrifugal force - self-clamping The knife overhang adjusts automatically without adjustment or screwing The planer table is adjusted by a stable and precisely guided parallelogram system, ensuring that the distance between the table tips and the cutterhead remains the same in every adjustment position. Fpodpfx Akjbxz S Hevsk The stable aluminum planer fence is anodized as standard, easily adjustable, and offers a generous support surface. The adjustable inclination from 90° to 45° is easily readable from the workstation. Standard with an auxiliary fence for safe planing, even of narrow workpieces. Fig. with optional equipment The connection point for the dust extraction is always in the same position, both for planing and thicknessing. This eliminates the need for additional dust extraction hoses or cumbersome repositioning and routing around the machine. Technical data Total length of planer tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Dimensions of planer fence 1200 x 190 mm Swivel range of planer fence 90 - 45° Min./Max. planing height 3/250 mm Cutterhead diameter / number of knives 100 mm / 4 pcs. Feed speed 5/8/12/18 m/min. Speed 5000 rpm Motor power 400 V / 50 Hz / S6 Dust extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg - available immediately

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench Fpodpjqlclbofx Akvjk 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Fsdpfxer Id S Eo Akvspk Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -