Generator set

Cummins Generators Declaration of Conformity, Diesel Gener

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 1,260 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,540 mm, Rough terrain forklift Load center: 500 Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Hsdsw N Tppopfx Ag Ujn Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 15.5/55 R 18 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 60 - 80% Sideshift, 3rd valve, 4th valve, half-cab,

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Hjdpew Uf Ihjfx Ag Uon Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Hedjwxd Atspfx Ag Ujn Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. Hsdevhctwopfx Ag Usn The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Year of construction: 1995, operating hours: 45,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale is a Loos steam boiler with Weishaupt oil burner. Gas burner available upon request. The unit is in very good condition. Model UL-S 5000, year of manufacture 1995. Steam output: 5,000 kg/h. Maximum steam pressure: 10 bar. Delivery available at extra cost. On-site inspection possible. Please contact us if you have any questions. Hsdoydq I Sjpfx Ag Uon

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Hsdpfxsg Rn Avj Ag Uen Send us your inquiry today!

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Hodjihh Spspfx Ag Usn Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Hodpfxewp Dq Ss Ag Ujn Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Hsdpfx Asry Trpsg Ujn Make an appointment for a demonstration.

Year of construction: 2013, condition: like new (used), functionality: fully functional, PiGo Fruit Pitting Machine – Sour Cherry & Plum | Stainless Steel | Fully Overhauled | 2 Machines Manufacturer: PiGo (Italy) Type: Industrial Fruit Pitting Machines Quantity: 2 Units Condition: Fully Overhauled – Ready for Production Material: Stainless Steel (INOX) Complete Processing Line Includes: - 2 × PiGo pitting machines - Stainless steel machine stands - Screw conveyor for pit removal - Feeding conveyor belt for fruit infeed at platform Overhaul & Service: The machines have undergone a comprehensive general overhaul: ✔ New chains fitted ✔ New plates and needles ✔ Gearboxes serviced ✔ Bearings replaced ✔ Oil replaced ✔ Fully tested and ready for immediate operation Hedpfsynwzmex Ag Ujn Tool Sets Included (per machine): For sour cherries: - 11/22 mm - 13/28 mm For plums: - 37/20 mm - 42/20 mm Advantages: - Industrial processing capacity - Heavy-duty, high-capacity machine - Stainless steel construction Sale Conditions: - Sold only as a complete package - Warranty available - Inspection possible upon request Location: Croatia (EU) *More pictures and videos available upon request.